This is a T56 for an LS1. It was built by Precision Autosports with carbon fiber syncros, steel viper shift fork, and hardened output shaft. It feels great! I drove it 300 miles and my clutch started slipping so I'm going to put an automatic in it. I want 1600$ obo for the tranny. I don't need a core for the tranny.

PRO 5.0 shifter with Lous short stick that is almost new. I'll take 170$ obo(180+45 new).

updated slave cylinder 100$obo (140 new)

a clutch master cylinder with the drill mod done to it 75$obo

Set of heads that were ported by Heads Up Cylinder Heads. They are fresh with comp 918 springs already installed in them. My car went 11.80 at 117 with a 224/224 5.69lift cam (the cam I'm selling). The heads flowed 271 intake and 198 exhaust without a pipe(if they were flowed with a pipe it would be around 220 like the sponsors do) These heads were also milled 30 thousandths to raise the compression(ran great on 91 octane gas with stock tuning) I want 700$ obo for the heads.

I'll take 250$ obo for the Morgan Motorsports cam its a 224-224 5.69 on a 112 LSA. This cam ran perfect on the stock tuning! It has the "spring saver technology" which makes it a lot easier on valve springs.

I also have a set of comp chromoly pushrods I'll take 70$ obo for.

I have a stock flywheel 50$obo

I also have a set of stock 99 heads Someone can make an offer on.

 

will you take 1500 for the tranny, slave, master, and shifter?

 

Interested in the heads, do you have any references since you have a low post count? send pics to a_94_trans_am@hotmail.com

Thanks

 

what else did you have done to your car besides the heads/cam when you went 11.80@117?

 

I have an ls6 intake, headers, a catback, and some other bolt ons. It was a good driver. The best I got it to go was 12.05 at 117.

 

The shifter as well as the pushrods are now sold.

 

I may be a little slow to write back to anyone who has any questions this week because I'm going on vacation for the next week. Thanks Brian

 

I'll take the heads - Sold. You have to do COD or meet in person and supply phone number and address. I have cash in hand...

 

ill take the pushrods....what size are they??

 

I'm sorry the pushrods are already sold.