I am getting out of hot rodding all together now, and I am selling everything I have left. I have already sold my car and the transmission but I have a lot of engine parts left. I live in north east Indiana and all of this will be a "make an offer" but please don't get too crazy and serious offers only please. I will also make package deals.

Ok, here we go...

*AI 200cc Heads and geometric corrected LT1 intake to the heads. I bought them from a member on here (ddr698) and never installed them on my car. I will not separate. Here is the thread: https://www.camaroz28.com/forums/sho...light=ai+200cc Sold !

*BBK 58mm Throttle body Sold

*set of Comp Cams Pro Mag NSA 1.6 7/17 stud roller rockers $150 + shipping Sold

*3 intakes, 2 of them have no fittings (1 painted red, 1 natural), the other is complete with fittings and stock throttle body. Bare intakes $30 + shipping

*2 MAF sensors, 1 has the screen and the other does not

*1 set stock valve covers $25 + shipping

*Polished (but not show quality) fuel rails, no FPR $25 + shipping

*Stock 643 heads with stock valves, 3/8 screw in studs, Isky guide plates, and Crane 10308 springs. All hardware except valves only have a few hundred miles on them. $100 + shipping

*NOS 10 lb bottle with pressure gauge, 15 ft of line, and mounting brackets

*Stock Iron LT1 heads...not sure if they are even good. They came on an engine I bought ....you pay shipping.

*3 water pumps, 1 of them would be good for a EWP as the bearings are shot

*Set of stock rockers and nuts

*3 stock windage trays

*Stock LT1 crank turned .010

*Stock set of pistons and rods, pistons need rings

*2 accessory brackets $25 + shipping

*LT1 ECM from a '94 Buick Roadmaster $40 + shipping

*2 untouched LT1 2-bolt blocks, 1 has surface rust in cylinders, the other needs bored $75 local pick up

*A4 flywheel

*2 timing covers '93 and '95 $25 + shipping

*stock timing set (unknown miles)

*95 GM Optispark, worked good when pulled $50 shipped

*95 Hub and dampener

*stock oil pressure sending unit and fittings

*spider and dogbones for lifter valley

*M155HV oil pump

*2 oil pump drive shafts

* 2 oil pans with 2 sets of oil pan rails

*Aluminum intake elbow Sold

*Misc A/C parts

*Radiator fans with bracket

Thats all I can think of for now and if I find more, I'll post it up. I will get to all PM's and respond on here as quick as I can but I am working 1 full time job and 2 part time jobs right now so it may take a day to get back with you.

Thanks,
Adam S.

 

Pm sent

 

Replied to.

 

Update on list...

 

AI heads and intake sold, TB sold, still have a lot of parts guys. I will be making a scrap run soon if nothing else sells.
I also have a LT4 knock module for sale too...Sold

 

How much for the aluminum intake elbow, and does it have the couplers and clamps with it or just the elbow? I'm in 53110, Wisconsin.

 

Its an aluminum elbow with 2 clamps, 2 couplers, and the IAT sensor. I will send pics to your email. How does $40 to your door sound?

 

I'll take the aluminum elbow per our PM.

 

Price of intakes??

 

Pm sent on parts

 

I appologize for any delay in responses. I have been tied up at a jury trial going on, (No, I'm not on trial, lol) and it looks as if it will last all week and then maybe some next week.

Anyhow, all PM's have been replied to and I will be updating the list up top shortly.

Jlo-- how does $30 plus shipping sound for the bare intakes? I can get close to that out of current scrap prices, but I would rather see someone use the intakes instead.

Adam S.

 

AI Heads and intake arrived today very pleased

Great seller everything came as described,excellent packing,speedy shipping
And excellent prices

Thanks Adam

Good luck with the rest

 

I'll take the lt4 knock sensor and the CCpro mags.
Pm sent

TexasWino

 

ProMags and knock sensor arrived today. Thanks

 

still have the stock heads and blocks??