Custom Ground Nitrous Blower Cam
11-17-2008 | 06:46 PM
#1
Thread Starter
Registered User
Joined: May 2008
Posts: 51
Custom Ground Nitrous Blower Cam
Here is all the info I have for it
Duration Advertised: 286* Intake/307* Exhaust
Duration @.050: 230* Intake 245* Exhaust
Lift with 1.5:1 rocker arms .565 Intake/.600 Exhaust
LSA:114
Has the long dowel pin for 95-97 lt1s
Its a comp, custom ground, if any of you board member recognize the specs of the cam and have any info, ie whos grind it is or if its just an off one.
Make offer
Duration Advertised: 286* Intake/307* Exhaust
Duration @.050: 230* Intake 245* Exhaust
Lift with 1.5:1 rocker arms .565 Intake/.600 Exhaust
LSA:114
Has the long dowel pin for 95-97 lt1s
Its a comp, custom ground, if any of you board member recognize the specs of the cam and have any info, ie whos grind it is or if its just an off one.
Make offer
Last edited by TripleWhite; 11-19-2008 at 05:49 PM. Reason: Cam specs
11-19-2008 | 09:27 PM
#3
Registered User
Joined: Feb 2008
Posts: 488
From: Las Vegas, NV
seems like a really high lift for 1.5 rockers. How old is this cam? seems weird to quote the lifts on a new cam that's that big with 1.5 rockers and not 1.6. How about actual lobe lift? I'm really interested but need to know the lobe profile to figure out if it will work with my springs or not. any way to call comp and find out?
Thread
Thread Starter
Forum
Replies
Last Post
dbusch22
Forced Induction
6
10-31-2016 11:09 AM