Custom LT1 D1SC procharger kit F-body
02-25-2012, 03:51 PM
#1
Registered User
Thread Starter
Join Date: Oct 2002
Location: Arkansas
Posts: 969
Custom LT1 D1SC procharger kit F-body
Seeing if there is interest in my Custom D1SC Procharger setup For LT1-LT4 engines (F-body). Selling this setup to go with a different direction with the car. Everything is brand new (bought new from Procharger) with less than 100 miles on the setup and about 6 dyno pulls, the car has been in my garage for about 4 years.
Kit comes with
D1SC Procharger (aluminum lightly brushed)
Custom 3.2 ATI Blower Pulley -8rib
Procharger 7.65 Crank Pulley-8rib
SDCE Custom Spring Loaded Tensioner (no slip at 15psi)
Black Powerdercoated ATI Blower bracket with custom SDCE mounting brackets (No Flex)with stands
Custom 3inch Aluminum 16 gauge tubing from blower to inlet of Intercooler transitioning to 4inch outlet of intercooler to Throttle body. Tubing coated with Nitroplate Thermal coating to help with heat. IAT bung is welded onto tubing for threaded IAT before Throttle Body.
Vortech Mondo bypass valve with Filter welded to tubing after intercooler
Tight radius Custom 4inch inlet with large 14inch K/N filter.
5ply silicone couplers with t-bolt clamps, everything setup to bolt on your LT1 F-body.
31X12X4 Front Mount Intercooler which mounts to FACTORY body front support.
-10 braided line Air/oil separator to pull crankcase with the procharger inlet from PCV valve
I have over $6700 in this setup, selling for $4400 shipped to your door US
I have pics below when installing, getting additional pics of the setup tomarrow. PLEASE SERIOUR INQUIRIES ONLY, PM me or email me at benCharles_10@hotmail.com, cell 870-335-8356
This is the nicest Procharger setup I have seen on an F-body
Kit comes with
D1SC Procharger (aluminum lightly brushed)
Custom 3.2 ATI Blower Pulley -8rib
Procharger 7.65 Crank Pulley-8rib
SDCE Custom Spring Loaded Tensioner (no slip at 15psi)
Black Powerdercoated ATI Blower bracket with custom SDCE mounting brackets (No Flex)with stands
Custom 3inch Aluminum 16 gauge tubing from blower to inlet of Intercooler transitioning to 4inch outlet of intercooler to Throttle body. Tubing coated with Nitroplate Thermal coating to help with heat. IAT bung is welded onto tubing for threaded IAT before Throttle Body.
Vortech Mondo bypass valve with Filter welded to tubing after intercooler
Tight radius Custom 4inch inlet with large 14inch K/N filter.
5ply silicone couplers with t-bolt clamps, everything setup to bolt on your LT1 F-body.
31X12X4 Front Mount Intercooler which mounts to FACTORY body front support.
-10 braided line Air/oil separator to pull crankcase with the procharger inlet from PCV valve
I have over $6700 in this setup, selling for $4400 shipped to your door US
I have pics below when installing, getting additional pics of the setup tomarrow. PLEASE SERIOUR INQUIRIES ONLY, PM me or email me at benCharles_10@hotmail.com, cell 870-335-8356
This is the nicest Procharger setup I have seen on an F-body
02-26-2012, 12:32 PM
#3
Registered User
Thread Starter
Join Date: Oct 2002
Location: Arkansas
Posts: 969
Re: Custom LT1 D1SC procharger kit F-body
Hey Real, selling this kit and I think I am going to FAB up a 2.9 or 3.3 Whipple blower. I have my converted Super Vic with Elbow Rail, etc that I am going to sell to Cheap, if you know anyone who is interested.
02-27-2012, 10:38 PM
#5
Registered User
Join Date: Sep 2007
Location: FL
Posts: 397
Re: Custom LT1 D1SC procharger kit F-body
Man...if you haven't sold the sucker yet can you please take a pic of the bracket that attaches to the head? Been trying to find a pic of one for years and no one has one and SDCE won't sell it seperately (bs). Thanks!
Thinkin of sellin mine as well and going PT88 but not sure yet.
Thinkin of sellin mine as well and going PT88 but not sure yet.
Thread
Thread Starter
Forum
Replies
Last Post
dbusch22
Forced Induction
6
10-31-2016 11:09 AM
CARiD
Supporting Vendor Group Purchases and Sales
0
01-14-2015 04:00 AM