Fore Sale: 1996 TA with custom paint and goodies
#1
Fore Sale: 1996 TA with custom paint and goodies
Go here to see some pics http://www.fbody.com/members/Flamed96TA/
FOR SALE
1996 PONTIAC TRANS AM
Black with custom flames and ice pearl clear
83,*** miles, auto, t-top, Graphite Leather int.
12-disc changer,
Mod's
LS1 Taillights
3.5 inch big block cowl hood with
Fuel pressure and vacume guages under the cowl
Custom chameleon flame work and paint
American Racing Torque Thrust II Wheels
17x11 rear and 17x9 front
315/35/17 nitto drag radials rear
245/40/17 cheap tires front
Will through in a set of 275/40/17 for the front and stock wheels
Performance Mod's
Hypertech power programmer with scan card
K&N Cold Air intake and 1le elbow
52mm BBK Throttle body
1.8 inch Eiabach Sport line lowering springs
New front struts were installed with the springs
Also air bags were installed in the rear springs
MSD ignition 6A
Yank 3.0 Thruster 2800 Stall converter
Pro form 1.6 roller rockers
3 inch Flow master cat-back with 3.5 inch tips
G2 Drive shaft loop and tunnel brace (Black)
Lakewood boxed control arms (Black)
BMR Bolt on Control arm relocation brackets (Red)
Lakewood adjustable tubular pan hard bar (Black)
BMR Strut Tower Brace (Red)
Maintenance work: I bought this car in 1999 with 62k on it and since then the only things I had to replace were:
Power steering pump (replaced in summer of 2000)
Transmission (replaced under warranty by Pontiac at 65k)
Egr valve (replaced in 2000)
New brakes (done around 72k)
$7500 obo
Call me at 443-623-4825 or 410-768-9159 ask for Ben
Leave message and I’ll get back to you. Thanks
Email me for more pics at bridgely2778@msn.com
http://www.fbody.com/members/Flamed96TA/
FOR SALE
1996 PONTIAC TRANS AM
Black with custom flames and ice pearl clear
83,*** miles, auto, t-top, Graphite Leather int.
12-disc changer,
Mod's
LS1 Taillights
3.5 inch big block cowl hood with
Fuel pressure and vacume guages under the cowl
Custom chameleon flame work and paint
American Racing Torque Thrust II Wheels
17x11 rear and 17x9 front
315/35/17 nitto drag radials rear
245/40/17 cheap tires front
Will through in a set of 275/40/17 for the front and stock wheels
Performance Mod's
Hypertech power programmer with scan card
K&N Cold Air intake and 1le elbow
52mm BBK Throttle body
1.8 inch Eiabach Sport line lowering springs
New front struts were installed with the springs
Also air bags were installed in the rear springs
MSD ignition 6A
Yank 3.0 Thruster 2800 Stall converter
Pro form 1.6 roller rockers
3 inch Flow master cat-back with 3.5 inch tips
G2 Drive shaft loop and tunnel brace (Black)
Lakewood boxed control arms (Black)
BMR Bolt on Control arm relocation brackets (Red)
Lakewood adjustable tubular pan hard bar (Black)
BMR Strut Tower Brace (Red)
Maintenance work: I bought this car in 1999 with 62k on it and since then the only things I had to replace were:
Power steering pump (replaced in summer of 2000)
Transmission (replaced under warranty by Pontiac at 65k)
Egr valve (replaced in 2000)
New brakes (done around 72k)
$7500 obo
Call me at 443-623-4825 or 410-768-9159 ask for Ben
Leave message and I’ll get back to you. Thanks
Email me for more pics at bridgely2778@msn.com
http://www.fbody.com/members/Flamed96TA/
#5
Originally posted by Flames-N-Fury
Glen Burnie, Maryland and Auto Body Plus did the paint work.
Glen Burnie, Maryland and Auto Body Plus did the paint work.
Anyway sorry to hijack the thread, good luck with the sale and TTT for you.
Thread
Thread Starter
Forum
Replies
Last Post
High HP TA
Car Audio and Electronics
0
09-06-2002 08:00 PM