forged shortblock/built 4l60e/yank 3600/FMS cam/obdI conv.
07-27-2005 | 02:19 AM
#1
Thread Starter
Registered User
Joined: Jan 2002
Posts: 1,743
From: Mission, Kansas
forged shortblock/built 4l60e/yank 3600/FMS cam/obdI conv.
Parts off my 97 formula....
SHORTBLOCK SOLD
9.2:1 compression with stock heads
4 bolt main block with 57k miles before I got it
Eagle forged crank 3.48"
Scat forged rods
SRP forged pistons
ARP main studs
ARP rod bolts
Hellfire file fit rings
1400 miles on shortblock
EDIT: forgot to mention motor is internally balanced.
Fully built 4l60e by MCS(NOT some cheapo tranny shop), cost me over $1500, SOLD
Yank 3600 converter with about 3,000 miles ...SOLD
Futral motorsports custom turbo cam 226/224 .568/.548 115lsa with 1400 miles on it, SOLD
obdI conversion pcm, currently 383 heads/cam 6 speed tune..$125
SHORTBLOCK SOLD
9.2:1 compression with stock heads
4 bolt main block with 57k miles before I got it
Eagle forged crank 3.48"
Scat forged rods
SRP forged pistons
ARP main studs
ARP rod bolts
Hellfire file fit rings
1400 miles on shortblock
EDIT: forgot to mention motor is internally balanced.
Fully built 4l60e by MCS(NOT some cheapo tranny shop), cost me over $1500, SOLD
Yank 3600 converter with about 3,000 miles ...SOLD
Futral motorsports custom turbo cam 226/224 .568/.548 115lsa with 1400 miles on it, SOLD
obdI conversion pcm, currently 383 heads/cam 6 speed tune..$125
Last edited by 1982z28with18s; 08-30-2005 at 04:14 AM.
07-28-2005 | 09:37 PM
#7
Registered User
Joined: Oct 2004
Posts: 1,228
From: Florida
Re: forged shortblock/built 4l60e/yank 3600/FMS cam/obdI conv.
Who built the shortblock? Does it need to be freshened up or what? Why are you selling it? I take it this engine was built for spray/boost, was it ever sprayed? What size are the piston dishes? PM and/or email me please, pretty interested.
07-29-2005 | 12:55 AM
#9
Registered User
Joined: Aug 2004
Posts: 226
From: Atlanta, GA
Re: forged shortblock/built 4l60e/yank 3600/FMS cam/obdI conv.
Originally Posted by blown94
Who built the shortblock? Does it need to be freshened up or what? Why are you selling it? I take it this engine was built for spray/boost, was it ever sprayed? What size are the piston dishes? PM and/or email me please, pretty interested.
Hmm It would be nice to also receive a pm with these details...As I am wanting to spray my new setup
Thanks,
Jacob
07-29-2005 | 01:12 AM
#10
Thread Starter
Registered User
Joined: Jan 2002
Posts: 1,743
From: Mission, Kansas
Re: forged shortblock/built 4l60e/yank 3600/FMS cam/obdI conv.
The engine was built by myself and one of my buddies who has built many low 9 second motors. It does not need freshened up since it only has 1400 miles on it, and it was taking out because I parted my car out because I bought a house. The motor was built for boost and was NEVER sprayed. It only had 6lbs of boost on it for about 800 miles since I never got time to dial in the tune and turn up the boost. I'll have to check the dish, I can't remember off the top of my head and I shipped some parts in the bos. I'll get the part # off them though tomorrow.
