FS - AFR 195 competition heads w/ brand new springs
08-13-2004 | 05:49 PM
#1
Thread Starter
Registered User
Joined: Mar 2001
Posts: 375
From: Glen Burnie, MD
FS - AFR 195 comp heads w/ new springs !New Price!
selling my heads for a new bare set to have ported.
- AFR LT4 195cc competition heads
- part 1039
- 2.05 valves
- ARP 7/16" rocker studs and guideplates
- brand new Comp Cams 987 springs 20 miles
- new valve seals
- 58cc chambers
- $1700
also have fully ported lt4 intake with opening for 58mm TB - $200
heads and intake cost $3000 new, and i have the receipt from nutek motorsports. these heads and 236/242 cam made 390rwhp 380tq with old valvesprings, floating at 6000rpm.
- AFR LT4 195cc competition heads
- part 1039
- 2.05 valves
- ARP 7/16" rocker studs and guideplates
- brand new Comp Cams 987 springs 20 miles
- new valve seals
- 58cc chambers
- $1700
also have fully ported lt4 intake with opening for 58mm TB - $200
heads and intake cost $3000 new, and i have the receipt from nutek motorsports. these heads and 236/242 cam made 390rwhp 380tq with old valvesprings, floating at 6000rpm.
Last edited by MadMaxz28; 08-23-2004 at 06:09 PM.
08-14-2004 | 01:26 PM
#3
Thread Starter
Registered User
Joined: Mar 2001
Posts: 375
From: Glen Burnie, MD
Re: FS - AFR 195 competition heads w/ brand new springs
$1700 for just the heads. these heads are capable of 450rwhp with a light port job and the right cam. about a year old with 90% street use. there $2600+ new and have brand new springs.
08-15-2004 | 06:14 PM
#4
Thread Starter
Registered User
Joined: Mar 2001
Posts: 375
From: Glen Burnie, MD
Re: FS - AFR 195 competition heads w/ brand new springs
come on guys i know someone has to be interested in some good AFR's.. these are great heads to start with, they flow up there with stage 3 ported GM LT1/LT4 heads, 280cfm intake / 230exhaust and can still be ported to 300+ cfm, and AFR's flow 10-20% better at low and mid lifts then ported gm heads.
Make me an offer.
Make me an offer.
Last edited by MadMaxz28; 08-15-2004 at 07:02 PM.
08-15-2004 | 07:01 PM
#6
Thread Starter
Registered User
Joined: Mar 2001
Posts: 375
From: Glen Burnie, MD
Re: FS - AFR 195 competition heads w/ brand new springs
i dont have any flow numbers but the dyno speaks for itself. i dynoed 390/380 on a hot humid day with worn out valvesprings. with the new springs and good weather im possitive it would top 400rwhp. plus theres still alot of room left for additional porting.Check it out this guy put down 452rwhp with custom cam and porting these same heads on a stock bottom end LT1.
http://web.camaross.com/forums/showt...ghlight=record
http://web.camaross.com/forums/showt...ghlight=record
08-15-2004 | 07:12 PM
#7
Registered User
Joined: Sep 1999
Posts: 448
From: house springs,mo.usa
08-19-2004 | 05:44 PM
#11
Registered User
Joined: Jul 2003
Posts: 85
From: new port richey,fl
Re: FS - AFR 195 competition heads w/ brand new springs
send me pics at nick1994z28@msn.com and if they look good ill buy them off you.thanks nick
08-19-2004 | 08:33 PM
#12
Registered User
Joined: Nov 2003
Posts: 103
From: California
Re: FS - AFR 195 competition heads w/ brand new springs
I will give you $1500 for the heads and intake. Send pics to xtreamtrans@yahoo.com
08-23-2004 | 06:02 PM
#15
Thread Starter
Registered User
Joined: Mar 2001
Posts: 375
From: Glen Burnie, MD
Re: FS - AFR 195 competition heads w/ brand new springs
i have a sale pending over at easternfbody.com for $1700 im waiting on a check. if it falls through ill post em forsale again with pics.
- they have about 15k, the valve spring just wore out so i replaced all of um and installed new valve seals.
- they have about 15k, the valve spring just wore out so i replaced all of um and installed new valve seals.
Last edited by MadMaxz28; 08-23-2004 at 06:07 PM.
Thread
Thread Starter
Forum
Replies
Last Post