This motor was built by Golen Engine Service. Very good quality shop.

Motor is all forged:

1 pc rear main roller block painted red, 4 bolt mains with ARP main bolts. 4.030" bore

Forged SRP flat top 5cc valve relief pistons (11:1 comp with 64cc head)
Forged 6" H beam Eagle Rods with ARP 8470 bolts
Forged Eagle crank, 3.75" stroke

Motor was built to take up to a 200shot of nitrous.

Motor has 1600 miles on it. Broke in on Valvoline conventional oil, and then ran mobil 1 ever since. Oil has been changed roughly every 150-300 miles depending on if I raced it alot between changes. Well taken care of. Mostly street miles but has seen the track as you may know from my vids.


NOT INCLUDED:
oil pump, lifter spider/retainers, timing cover/timing chain, crank gear, or any block sensors unless you want the knock sensor it has for 85-89 ecms. No flywheel or flywheel bolts unless you need the bolts



Asking 2,500 for a high quality strong built shortblock thats nearly like new. I'd like local pickup if possible as i dont know how i would ship it. I will be ordering a new motor so I may eventually get a crate to put it in but shipping will be quite pricey. It cost me 359 to ship it to my door from Main.

Located in Pittsburgh area. Can meet up to 2 hrs away on weekends if needed

Motor is on stand right now and i still have to take cam/heads off. I'll have that off soon.

Here's what it looked like brand new the day i got it.



heres a shot of the underside AS IT SITS on the stand right now: Very clean

 

bump