LS6 intake,Mufflex 4",Hooker LT's,T2R w/ 3.73's,PHR,LCA,32MM SB,17x11 new 315's, ++++
10-03-2004 | 10:50 AM
#1
Thread Starter
Registered User
Joined: Apr 2002
Posts: 57
From: Toronto, Canada
Updated list of stuff for sale...
I am looking to clear out my garage as well as fund my latest round of mods... I live in Montreal Canada, so the asking prices below are in Can $'s... I can sell to the states as well... 1$ CAN = $.8USD
For example, I am asking $800USD for the complete 4" Mufflex exhaust with Hooker LT's...
Email me andre@avigdor.net if you are interested...
Speedline Corse ultra light 5 star 1 piece racing wheels with new BFG KD rubber
2 X 9” Rims minor cosmetic scratches in the paint from when the tires where mounted (NO RASH!)
2 X 11” Rims in perfect shape
2 X 275/40 with fewer than 100KM’s!
2 X 315/35 with fewer than 100KM’s!
MSRP on the tires alone are $1000USD
Not sure about the MSRP on the rims…
Asking $2000CAN for rims & rubber…
Or $1000CAN for the rims alone
Or $1500CAN for the rubber
I will consider trades on ZR1 rims
SLP Panhard Bar, Boxed & Reinforced 1982-02 Camaro/Firebird
http://www.slponline.com/view_product.asp?P=96701
MSRP $100USD
Asking $75CAN
MINT condition
--------------------------------------------------------------------------------
This fully boxed panhard bar really make a difference in handling for any 1982-2002 Camaro or Firebird. Modified by welding a 1/8-inch steel plate to box the arms and reinforce the bar for increased rigidity and then black powder coated for a durable and attractive appearance. SLP also installs new polyurethane bushings to help decrease deflection under load and create more control and stability in your Camaro or Firebird's rear suspension. While perfect for street use, these new parts are designed for all forms of racing, from drag racing to auto crossing. These are an easy bolt-on addition to any third-or-fourth-generation "F"-body. These are the same parts found in our suspension package (Part #70001A).
SLP Lower Control Arms, Boxed & Reinforced 1982-02 Camaro/Firebird
MSRP $150USD
Asking $100CAN
MINT condition
Intake Manifold, 1998-00 Camaro/Firebird LS6 High Performance
http://www.slponline.com/view_product.asp?P=30041
MSRP $500USD
Asking $400CAN
MINT condition taken off my 2002 Camaro @ 40K
--------------------------------------------------------------------------------
SLP has come up with a solution for the 1998-2000 Camaro/Firebird owner looking for more performance. The high performance LS-6 Intake Manifold is now available from SLP featuring SLP’s exclusive EGR modification, which enables the use of the vehicles stock EGR system. The new intake's increased plenum volume and massaged runner design results in an impressive gain of up to 15 hp at the rear wheels providing improved 0-60 and ¼ mile acceleration. After installation, the new LS-6 intake manifold looks nearly indistinguishable from the original LS-1 intake manifold making it a direct bolt-on replacement. SLP’s intake manifold package includes all necessary parts, hardware, detailed instructions and a limited warranty*.
2002 Stock LS1 Camaro heads in perfect shape taken off my car @ 30K
Asking $350CAN
Hooker Longtube Headers 2000-'02 Camaro / Firebird ceramic coated headers
http://www.tbyrne.com/ls1catalog.html
MSRP $630USD
Asking $500CAN
They look used but are mechanically perfect, taken off a race car @ 1000KM's
--------------------------------------------------------------------------------
These tuned length headers have all emission control devices accommodated. They are built with 18 gauge 1 3/4" primary tubes that improve the engine ability to breathe over the stock manifolds. Hooker's Super competition headers comes finished with a baked on high heat resistant black paint or for a show look Hooker also offer's a Metallic Ceramic Thermal Barrier Coating. This coating provides improved thermal stability by reducing the possibility of header cracking. The high luster finish is rust resistant and acts as an insulator resulting in higher exhaust temperatures within the system to increase performance while lowering the under-hood temperatures.
Mufflex 4 inch Catback Kit for LS F-Body with Spintech Muffler & Single 4" Hideaway Tailpipe
http://www.mufflex-performance.com/fbody_6.html
MSRP $500USD
Asking $400CAN
New condition, taken off a race car with almost no miles!
Mufflex off road Y pipe Dual 3" to a 4" Flowmaster Racing "Y" Collector
http://www.mufflex-performance.com/fbody_8.html
MSRP $250USD
Asking $200CAN
Almost new, taken off a race car with almost no miles! Some minor cosmetic scratches at the bottom of the Y pipe...
Complete exaust made up of the above 3 parts...
MSRP $1380USD
Asking $1000CAN
Original 2002 Z28 black hood
Perfect condition taken off my Z28 @ 40K
Asking $100CAN
Complete 10 bolt with Torsen T2R gear driven differential & Richmond 3.73's with stock 2002 LS1 rotor for 98-02 ABS/TCS cars
http://www.globalwest.net/torsen_traction_differential.htm#TORSEN%20RACEMAST ER%20T-2R%20(TYPE%202R)
MSRP ~$1500USD including 10 bolt, T2R, Richmond 3.73's and labour
This is pretty much the strongest 10 bolt you can buy... it has only about 10K on it and has never seen anything better than a 2.0 60' time. I just had the T2R inspected by L-Sport in Montreal while having the fluids changed and it is in 100% perfect shape... The Richmond gears a little noisy, but this is pretty common.
Asking $750CAN complete with rotors... I can throw in the calipers as well for anyone wanting to retrofit this on to a 93-97 LT1 car.
Eibach Sportline Spring Kit
http://www.lmperformance.com/1891/1.html
MSRP $240USD
Asking $150CAN or trade of Pro Kit Spring Kit
Perfect condition with under 1K
--------------------------------------------------------------------------------
Eibach Performance Spring Kits dramatically improve cornering capability and lessen that nose dive toward the pavement under hard braking. Eibach's progressive rate springs maintain a soft ride for daily driving but progresses to a stiffer rate when performance is demanded from the car. They come powder coated charcoal grey and are compatible with factory & aftermarket shocks. (Sportline springs are powdercoated gloss red.) Eibach has determined the ideal lowering heights for these vehicles through extensive testing (lowering vehicle more may cause ground clearance problems and excessive body roll as the stock sway bars may not be able to keep up.)
Eibach Sportline Performance Springs Lowers approximately 1.8 inch both front and rear.
32MM Front Sway bar
MSRP $100USD
Asking $75CAN
Perfect condition
Stock 2002 Z28 LCA, PHR, Torque Arm and sway bars
This would be good for someone with an older F-Body…
Asking $100CAN for everything!
Andre Avigdor
WWW.AVIGDOR.NET
For example, I am asking $800USD for the complete 4" Mufflex exhaust with Hooker LT's...
Email me andre@avigdor.net if you are interested...
Speedline Corse ultra light 5 star 1 piece racing wheels with new BFG KD rubber
2 X 9” Rims minor cosmetic scratches in the paint from when the tires where mounted (NO RASH!)
2 X 11” Rims in perfect shape
2 X 275/40 with fewer than 100KM’s!
2 X 315/35 with fewer than 100KM’s!
MSRP on the tires alone are $1000USD
Not sure about the MSRP on the rims…
Asking $2000CAN for rims & rubber…
Or $1000CAN for the rims alone
Or $1500CAN for the rubber
I will consider trades on ZR1 rims
SLP Panhard Bar, Boxed & Reinforced 1982-02 Camaro/Firebird
http://www.slponline.com/view_product.asp?P=96701
MSRP $100USD
Asking $75CAN
MINT condition
--------------------------------------------------------------------------------
This fully boxed panhard bar really make a difference in handling for any 1982-2002 Camaro or Firebird. Modified by welding a 1/8-inch steel plate to box the arms and reinforce the bar for increased rigidity and then black powder coated for a durable and attractive appearance. SLP also installs new polyurethane bushings to help decrease deflection under load and create more control and stability in your Camaro or Firebird's rear suspension. While perfect for street use, these new parts are designed for all forms of racing, from drag racing to auto crossing. These are an easy bolt-on addition to any third-or-fourth-generation "F"-body. These are the same parts found in our suspension package (Part #70001A).
SLP Lower Control Arms, Boxed & Reinforced 1982-02 Camaro/Firebird
MSRP $150USD
Asking $100CAN
MINT condition
Intake Manifold, 1998-00 Camaro/Firebird LS6 High Performance
http://www.slponline.com/view_product.asp?P=30041
MSRP $500USD
Asking $400CAN
MINT condition taken off my 2002 Camaro @ 40K
--------------------------------------------------------------------------------
SLP has come up with a solution for the 1998-2000 Camaro/Firebird owner looking for more performance. The high performance LS-6 Intake Manifold is now available from SLP featuring SLP’s exclusive EGR modification, which enables the use of the vehicles stock EGR system. The new intake's increased plenum volume and massaged runner design results in an impressive gain of up to 15 hp at the rear wheels providing improved 0-60 and ¼ mile acceleration. After installation, the new LS-6 intake manifold looks nearly indistinguishable from the original LS-1 intake manifold making it a direct bolt-on replacement. SLP’s intake manifold package includes all necessary parts, hardware, detailed instructions and a limited warranty*.
2002 Stock LS1 Camaro heads in perfect shape taken off my car @ 30K
Asking $350CAN
Hooker Longtube Headers 2000-'02 Camaro / Firebird ceramic coated headers
http://www.tbyrne.com/ls1catalog.html
MSRP $630USD
Asking $500CAN
They look used but are mechanically perfect, taken off a race car @ 1000KM's
--------------------------------------------------------------------------------
These tuned length headers have all emission control devices accommodated. They are built with 18 gauge 1 3/4" primary tubes that improve the engine ability to breathe over the stock manifolds. Hooker's Super competition headers comes finished with a baked on high heat resistant black paint or for a show look Hooker also offer's a Metallic Ceramic Thermal Barrier Coating. This coating provides improved thermal stability by reducing the possibility of header cracking. The high luster finish is rust resistant and acts as an insulator resulting in higher exhaust temperatures within the system to increase performance while lowering the under-hood temperatures.
Mufflex 4 inch Catback Kit for LS F-Body with Spintech Muffler & Single 4" Hideaway Tailpipe
http://www.mufflex-performance.com/fbody_6.html
MSRP $500USD
Asking $400CAN
New condition, taken off a race car with almost no miles!
Mufflex off road Y pipe Dual 3" to a 4" Flowmaster Racing "Y" Collector
http://www.mufflex-performance.com/fbody_8.html
MSRP $250USD
Asking $200CAN
Almost new, taken off a race car with almost no miles! Some minor cosmetic scratches at the bottom of the Y pipe...
Complete exaust made up of the above 3 parts...
MSRP $1380USD
Asking $1000CAN
Original 2002 Z28 black hood
Perfect condition taken off my Z28 @ 40K
Asking $100CAN
Complete 10 bolt with Torsen T2R gear driven differential & Richmond 3.73's with stock 2002 LS1 rotor for 98-02 ABS/TCS cars
http://www.globalwest.net/torsen_traction_differential.htm#TORSEN%20RACEMAST ER%20T-2R%20(TYPE%202R)
MSRP ~$1500USD including 10 bolt, T2R, Richmond 3.73's and labour
This is pretty much the strongest 10 bolt you can buy... it has only about 10K on it and has never seen anything better than a 2.0 60' time. I just had the T2R inspected by L-Sport in Montreal while having the fluids changed and it is in 100% perfect shape... The Richmond gears a little noisy, but this is pretty common.
Asking $750CAN complete with rotors... I can throw in the calipers as well for anyone wanting to retrofit this on to a 93-97 LT1 car.
Eibach Sportline Spring Kit
http://www.lmperformance.com/1891/1.html
MSRP $240USD
Asking $150CAN or trade of Pro Kit Spring Kit
Perfect condition with under 1K
--------------------------------------------------------------------------------
Eibach Performance Spring Kits dramatically improve cornering capability and lessen that nose dive toward the pavement under hard braking. Eibach's progressive rate springs maintain a soft ride for daily driving but progresses to a stiffer rate when performance is demanded from the car. They come powder coated charcoal grey and are compatible with factory & aftermarket shocks. (Sportline springs are powdercoated gloss red.) Eibach has determined the ideal lowering heights for these vehicles through extensive testing (lowering vehicle more may cause ground clearance problems and excessive body roll as the stock sway bars may not be able to keep up.)
Eibach Sportline Performance Springs Lowers approximately 1.8 inch both front and rear.
32MM Front Sway bar
MSRP $100USD
Asking $75CAN
Perfect condition
Stock 2002 Z28 LCA, PHR, Torque Arm and sway bars
This would be good for someone with an older F-Body…
Asking $100CAN for everything!
Andre Avigdor
WWW.AVIGDOR.NET
Last edited by vmax1500; 10-19-2004 at 04:52 PM.
, haha
10-03-2004 | 02:04 PM
#3
Thread Starter
Registered User
Joined: Apr 2002
Posts: 57
From: Toronto, Canada
Re: LS6 intake,Mufflex 4",Hooker LT's,T2R w/ 3.73's,PHR,LCA,32MM SB,17x11 new 315's, ++++
Good catch on the wheels... those tires in Canada end up costing about $2000CAN... I don't really want to sell them without the rims... my price for the combo is pretty good @ $1600USD... I am open to serious offers...
I think the rest of my prices are really fair!
I think the rest of my prices are really fair!
10-19-2004 | 04:51 PM
#4
Thread Starter
Registered User
Joined: Apr 2002
Posts: 57
From: Toronto, Canada
Re: LS6 intake,Mufflex 4",Hooker LT's,T2R w/ 3.73's,PHR,LCA,32MM SB,17x11 new 315's, ++++
The following parts are still for sale... I have changed the pricing to US $'s to make it easier to understand...
Speedline Corse ultra light 5 star 1 piece magnisium racing wheels
2 X 9” Rims minor cosmetic scratches in the paint from when the tires where mounted (NO RASH!)
2 X 11” Rims in perfect shape
MSRP on the rims are $3600USD ($900 each!)
I am asking $1000USD for the 4 rims and will consider trades on ZR1 rims...
2002 Stock LS1 Camaro heads in perfect shape taken off my car @ 30K
Asking $250US
Mufflex 4 inch Catback Kit for LS F-Body with Spintech Muffler & Single 4" Hideaway Tailpipe
http://www.mufflex-performance.com/fbody_6.html
MSRP $500USD
Asking $300USD
New condition, taken off a race car with almost no miles!
Original 2002 Z28 black hood
Perfect condition taken off my Z28 @ 40K
Asking $100USD
Andre Avigdor
WWW.AVIGDOR.NET
Speedline Corse ultra light 5 star 1 piece magnisium racing wheels
2 X 9” Rims minor cosmetic scratches in the paint from when the tires where mounted (NO RASH!)
2 X 11” Rims in perfect shape
MSRP on the rims are $3600USD ($900 each!)
I am asking $1000USD for the 4 rims and will consider trades on ZR1 rims...
2002 Stock LS1 Camaro heads in perfect shape taken off my car @ 30K
Asking $250US
Mufflex 4 inch Catback Kit for LS F-Body with Spintech Muffler & Single 4" Hideaway Tailpipe
http://www.mufflex-performance.com/fbody_6.html
MSRP $500USD
Asking $300USD
New condition, taken off a race car with almost no miles!
Original 2002 Z28 black hood
Perfect condition taken off my Z28 @ 40K
Asking $100USD
Andre Avigdor
WWW.AVIGDOR.NET
10-20-2004 | 05:51 PM
#6
Thread Starter
Registered User
Joined: Apr 2002
Posts: 57
From: Toronto, Canada
Re: LS6 intake,Mufflex 4",Hooker LT's,T2R w/ 3.73's,PHR,LCA,32MM SB,17x11 new 315's, ++++
Waiting for payment on the Mufflex cat-back... everything else is still for sale...
I am open to offers...
I am surprised no one has jumped on my wheels... these are One-piece cast magnesium racing wheels that list for $900 each... they only weigh about 15lbs!!! I would take $900 for all 4 just because I don't want to dish out another 2 grand to get a pair of matching wheels for my ET Streets...
Here's my car with the Speedline's up front and my crappy looking 10 spoke SS rims out back...
I am open to offers...
I am surprised no one has jumped on my wheels... these are One-piece cast magnesium racing wheels that list for $900 each... they only weigh about 15lbs!!! I would take $900 for all 4 just because I don't want to dish out another 2 grand to get a pair of matching wheels for my ET Streets...
Here's my car with the Speedline's up front and my crappy looking 10 spoke SS rims out back...
11-02-2004 | 08:02 PM
#9
Thread Starter
Registered User
Joined: Apr 2002
Posts: 57
From: Toronto, Canada
Re: LS6 intake,Mufflex 4",Hooker LT's,T2R w/ 3.73's,PHR,LCA,32MM SB,17x11 new 315's, ++++
Sorry... like I said before, the only parts I have left are the ones below... I also have a stock 02 fuel pump and LS6 clutch and flywheel...
Speedline Corse ultra light 5 star 1 piece magnisium racing wheels
2 X 9” Rims minor cosmetic scratches in the paint from when the tires where mounted (NO RASH!)
2 X 11” Rims in perfect shape
MSRP on the rims are $3600USD ($900 each!)
I am asking $1000USD for the 4 rims and will consider trades on ZR1 rims...
2002 Stock LS1 Camaro heads in perfect shape taken off my car @ 30K
Asking $200US
Original 2002 Z28 black hood
Perfect condition taken off my Z28 @ 40K
Asking $100USD
Andre Avigdor
WWW.AVIGDOR.NET
Speedline Corse ultra light 5 star 1 piece magnisium racing wheels
2 X 9” Rims minor cosmetic scratches in the paint from when the tires where mounted (NO RASH!)
2 X 11” Rims in perfect shape
MSRP on the rims are $3600USD ($900 each!)
I am asking $1000USD for the 4 rims and will consider trades on ZR1 rims...
2002 Stock LS1 Camaro heads in perfect shape taken off my car @ 30K
Asking $200US
Original 2002 Z28 black hood
Perfect condition taken off my Z28 @ 40K
Asking $100USD
Andre Avigdor
WWW.AVIGDOR.NET
Thread
Thread Starter
Forum
Replies
Last Post
carguyshu
Parts For Sale
20
01-22-2017 12:19 PM