jonesy91z28

I have up for sale a set of lt1 heads off my lt1 motor. They have comp double springs set up for 600 lift. They have been fully ported locally and have had a three angle race vavle job. THey still have the stock size vavles in them. This heads have ran 11.4 on a 383 lt1. I have time slips to show. I spun a main bearning and am thinking of parting out the whole motor. But I want to see if I can get rid of the heads first. I will take 800.00 for them and I will also throw in a set of arp head bolts with them. They are ready to bolt on. If someone wants the heads then I will have a whole list of parts from a 306 cam to soild roller lifters for a lt1 block to a lt4 timing chain and srp pistons and the list goes on. Just want to get rid of the heads first before I part with everything else.

dhirocz

I might be interested in these heads in a month or so if nobody takes them... it'll save me the need to port the ones on my car now. send me a list of the parts on that motor too. I might want to 'upgrade'...

have any pics and flow numbers?

dhirocz@yahoo.com

1984camaroz28

any flow #s

jonesy91z28

Here are the flow numbers. They were flowed at 25 at first so that is the numbers that I have on paper. When I flowed them at 28 they picked up about 20 cfm all the way through.


lift 97 194 291 388 485 582 600 625

cfm 57 117 162 199 225 219 229 221

Like I said these heads ran very strong. I ran the 11.4 with a dual plain intake and carb. Yes I converted over to the carb because this was in a 91 camaro and it was just easier for me to do. Anyway I fell that with a good intake and the right programming they might go faster.

jonesy91z28

I forgot that the heads come with screw in studs and guide plates. They also have arp bolts

jonesy91z28

anyone?

StumpDeisel

PM sent

jonesy91z28

sorry for the delay lighting got my modem I sent you a pm back