LT1 SPEC Stage 4 Clutch - 1,000 Miles
10-10-2011 | 04:47 PM
#4
Registered User
Joined: Aug 2002
Posts: 885
From: Montreal, Quebec
Re: LT1 SPEC Stage 4 Clutch - 1,000 Miles
I guess there's no chance that you would be willing to part out the disk and pressure plate? I already have a spring loaded spec 3 and want to upgrade to the spec 4 disk...
10-26-2011 | 04:32 PM
#10
Registered User
Joined: Aug 2001
Posts: 239
From: Here
Re: LT1 SPEC Stage 4 Clutch - 1,000 Miles
ehh I'm scared of buying used clutches. Could chatter, etc. Price is fair if your honest which I'm sure you are but still.....
That and my car is a daily so it would be overkill for me.
That and my car is a daily so it would be overkill for me.
10-27-2011 | 07:50 AM
#12
Thread Starter
Registered User
Joined: Aug 2003
Posts: 503
From: Cleveland, OH
Re: LT1 SPEC Stage 4 Clutch - 1,000 Miles
Thanks for the help guys.
I measured the thickness of each puck and they are all 9/32". None of them have grooves or have worn unevenly.
And I thought I had this in there, but this clutch only has 1,000 miles on it. If you saw any of the posts about my car or the motor I just sold, the whole setup had 1,000 miles on it. It sat for the last few years, so I've decide to part the car out.
I measured the thickness of each puck and they are all 9/32". None of them have grooves or have worn unevenly.
And I thought I had this in there, but this clutch only has 1,000 miles on it. If you saw any of the posts about my car or the motor I just sold, the whole setup had 1,000 miles on it. It sat for the last few years, so I've decide to part the car out.
Thread
Thread Starter
Forum
Replies
Last Post
High HP TA
Car Audio and Electronics
0
09-06-2002 08:00 PM