ok...finally the part out will begin...most of the parts are near brand new...take in consideration this thread has been posted on several boards so just because you post first here doesnt mean you have first dibs...if the parts begin to sell quickly i will make two weekly trips to the ups store, once on mondays and once on fridays...heres the list...

>trick flow ceramic coated elbow: $80 plus shipping
>KONI rear drag shocks: $100 plus shipping
>Harwood 2.5" cowl hood: $375-prefer pick up
>15x3.5 WELD draglites 165r15 widetracks and 15x8 WELD draglites with 255-50-15 street tires $625 prefer pick up
>15x8 WELD draglites with 26x10x15 M/T et drags $325 prefer pick up
>k&n cold air intake(could use a new filter): $100 plus shipping


thats whats up for sale now...as soon as i get a buy for the heads, intake, or both then the list below will be for sale:

>355 c.i. LT1
speed pro forged piston(4.030)
speed pro rings
new freeze plugs
clevite main/rod/cam bearings
polished crank
balanced rods
new melling oil pump
less than 500 miles on all of these.....$1000 picked up

>fully ported NUTEK heads...these were JASON SHORTS old heads and as follows:
2.02/1.60 Ferrea stainless series 6000 valves, +050" length for higher lift cams
Larger valve seats
Fresh valvejob
Machined for 1.55” dia valvesprings

Flow numbers:

Intake Lift Exhaust
.100 70 58
.200 155 105
.300 194 140
.400 232 174
.500 263 199
.550 276 205
.600 278 207

these are fully assembled minus rockers...they have combination motorsport dual valve springs good to .610 lift $1200 plus shipping
>cam motion custom grind cam(233/241 .578/.596 112)...this cam was ground for the heads and other mods $275 plus shipping

>>i will sell the heads/cam for $1400 plus shipping

>racers net ported MAF ends: $50 plus shipping
>LT4 starter: $75 plus shipping
>PRO-FAB k-member-red $300-prefer picked up
>fairly new radiator(5K miles): $100 plus shipping

>>>few other things for sale:

LT1 dual cooling fans: $150 plus shipping

stock 10 bolt fom 94z....3.73s with 5K miles or less...$250 picked up

6 speed for the 94z with RAM powergrip HD clutch (only 375miles) (paid $450) and hurst shifter...best offer picked up


ill be adding more peridoically...you can post, pm me or email me at groundpoundinlt1@yahoo.com... if you have any questions or need pics do one of the following three above...IF USING PAYPAL, add 3.5% for the paypal fees

thanks
bubba

 

I want dibs on the phr for sure. Had dibs before you were definitely parting it out as well

Can you send some pics to JMK8504@sbcglobal.net of the phr, intake, shocks please?

Thanks

I sent you a pm as well.

 

Also, how does the lunati timing chain work with 94 and 95 cars? I didnt think anyone made a timing chain set for either of these years?

 

How many miles on the timing set? I'm right around the corner from you.

 

dibs (on this site lol) for the intake cash in hand pics to brandondavid@houston.rr.com

 

If you decide to ship the shortblock i'll take it. My zip is 92110
thanks!!
Ron...

 

how much for a pkg deal on the following...?

cam, lifters, pushrods, rockers, guideplates, timing set, and coil?


and did you want those springs that i had for sale? i dunno if you remember that but you called dibs and never sent me any money.

Thanks!

 

redsta: ive got someone that called dibs actually before you for both the lcas/phr together...if that falls through then your up...and i told you before that the lunatti set was nothing but a fancy gm set...ill get you some pics of the shocks...the intake is still on the car so ill get the best pic i can

hotwire: timing set has less than 500 miles as mentioned in original post

bdc95ta: you have dibs on the intake...ill take some pics but again its still on the car

RONSS96: too much hassle to think about shipping.. where you located? if you in reasonble meeting distance we may can work something out

blahster: $825 plus shipping...also i dont need the springs as i have a set also that will be forsale...i was gonna buy yours for my other z but changed my mind...thanks anyways

 

heres something to look at thats the best pic of the motor that ill be able to get as its still in the car...also added some other pics

 

Send me a message if the deal falls through for the phr. I have a couple people in my city that have them too for sale, so i might just end up buying theirs to save on shipping.

How many miles on the shocks?

 

i bought the shocks off of a buddy who bought them new..not sure on the milaege but i know that there was a night and day difference..ive put less than 500 miles on them since ive had them..

 

also, are those valve covers the proforms you're selling? if so, I'm calling dibs!!!

 

>proform chevrolet valve covers...has a small crack around one bolt hole but still works fine: retails:$119.95 $50 plus shipping

these are the ones that have th bowtie and says chevrolet beside of it

 

1.6 comp pro mag NSA roller rocker 7/16th: $225 plus shipping
>gm guidplate:$30 plus shipping
>comp cams pushrods:$40 plus shipping
>comp oem lifters: $125 plus shipping

I'll offer $400 on the above items depending on condition and milage. Cash in hand and local pickup. like pic's please. pm sent.

 

do you still have the hood??? If your willing to do some negotiating with me (as far as picking it up)... I can pick it up when I get back from Japan. Please let me know. Im also interested in the throttle body... do you have both of them?

Will