I am parting out a black 1999 camaro body with black interior. No motor/drivetrain/suspension, what you see is what I got. Prices do not include shipping and I would rather not ship the larger items (body panels) so a local sale is preferable on those. Would rather keep the cage in one piece so whoever buys it can cut it wherever is easiest for them to re-weld.
Make offer if you do not agree with a price.
Everything is located in Aiken, SC near the Georgia border.

Wolfe 6-point weld-in Chromoly roll bar -- $275
http://i41.photobucket.com/albums/e2...p/DSCN1563.jpg
http://i41.photobucket.com/albums/e2...p/DSCN1562.jpg

Rear bumper: black, paint chipped above the license plate and was spray painted there, there is a small cut on the bottom on each side but you can’t see it from the side or rear, only underneath (see pic) -- $60
http://i41.photobucket.com/albums/e2...p/DSCN1613.jpg
http://i41.photobucket.com/albums/e2...p/DSCN1614.jpg
http://i41.photobucket.com/albums/e2...p/DSCN1615.jpg

Tail panel, black, has a hole in it from mounting a switch and a small crack on one end. It can probably be patched up – $25
http://i41.photobucket.com/albums/e2...p/DSCN1567.jpg
http://i41.photobucket.com/albums/e2...p/DSCN1568.jpg

Hatch, black, window is tinted but the tint is coming off in places, no wing – $75
http://i41.photobucket.com/albums/e2...p/DSCN1569.jpg

Red rear side markers – $10
http://i41.photobucket.com/albums/e2...p/DSCN1579.jpg

Hatch shocks – $15
http://i41.photobucket.com/albums/e2...p/DSCN1584.jpg

Ebony dome light – $10
http://i41.photobucket.com/albums/e2...p/DSCN1591.jpg

97-02 Camaro gauge bezel, black – $15
http://i41.photobucket.com/albums/e2...p/DSCN1589.jpg

Headlight switch –$15
http://i41.photobucket.com/albums/e2...p/DSCN1610.jpg

97-02 Camaro radio bezel w/ AC vents, black – $20
http://i41.photobucket.com/albums/e2...p/DSCN1597.jpg

97-02 Camaro driver side AC vent/bezel – $10
http://i41.photobucket.com/albums/e2...p/DSCN1594.jpg

97-02 Camaro passenger side AC vent/bezel – $5
http://i41.photobucket.com/albums/e2...p/DSCN1596.jpg

Driver power window/lock/mirror switches and bezel, gray, all switches work – $25
http://i41.photobucket.com/albums/e2...p/DSCN1618.jpg
Passenger side power window/lock switches and bezel, gray, all switches work -- $25
http://i41.photobucket.com/albums/e2...p/DSCN1619.jpg
--$45 for both

Fuel tank straps --$make offer

Trunk latch motor – $15
http://i41.photobucket.com/albums/e2...p/DSCN1580.jpg

Throttle position controller – $20
http://i41.photobucket.com/albums/e2...p/DSCN1582.jpg

Parking brake handle/cable – $15
http://i41.photobucket.com/albums/e2...p/DSCN1605.jpg

Rear/taillight wiring harness – $make offer
http://i41.photobucket.com/albums/e2...p/DSCN1606.jpg

Interior wiring harness, includes fuse block but I believe is missing the wiring for speakers. Otherwise I think it’s complete – $make offer
http://i41.photobucket.com/albums/e2...p/DSCN1612.jpg


Ebony door panels that have been modified for a roll cage.
Door panels were cut for side bars. --$10 each
http://i41.photobucket.com/albums/e2...p/DSCN1603.jpg
http://i41.photobucket.com/albums/e2...p/DSCN1611.jpg

other stuff
94-03 S10 altezza taillights like these but with chrome housing http://www.sporttruckdirect.com/Pics...9-2036_Big.jpg $20

Driver side A-pillar trim from 01 TA, ebony. --$15

Steering wheel from 97 firebird, gray, has radio controls but they stick and the paint is peeling. Airbag was blown but that shouldn't affect the steering wheel -- $15

Steering column from 01 TA 6spd, complete but no key, includes knuckle/shaft, small crack in plastic -- $45

Pass. side firebird door handle bezel, black --$20

ABS module from 97 Z28 6spd that I think had traction control --$15

LT1 steel driveshaft --$25

Stock LCA's from 97 firebird --$20

X-brace from 97 firebird convertible --$20

1 stock Z28 exhaust tip --$15

Axles with long studs out of a LS1 car 10bolt --$30 for both

93-02 camaro seat belt guides, gray --$10

Seat trim piece that covers the reclining mechanism, driver and pass. sides, color is graphite, not cracked but some wear --$5 each

Windsheild washer fluid reservoir, no cap --$10?

LS1 power steering cooler $10

Integrated body control module from 01 TA 6spd --$10

brake line heat shield from LS1 TA --$5

Front sway bar from 01 TA --$20

Rear brake rotors from LS1 car --$25

Rear brake rotors from LT1 car --$15

Upper/Lower stock A-arms from 01 TA --$10 each

Stock 10bolt rearend cover --$free

OBDII PCM from 97 LT1/auto with 2.73 gears --$40

93-02 Firebird stock rear side markers --$10

93-97 Camaro stock amber turn signal lenses --$15

 

Send me your address. I would like to purchase these items.

Steve

 

I have been looking everywhere for a replacement door handle bezel. How can I purchase this item from you?

Steve S

2000 Black Chevy Camaro

 

i want the long black plastic piece that goes under the front bumper, if you have it

 

do you have the battery tray and hold down bracket? Also, why is this car being parted? it looks fine

 

do you have the center console lid

 

Snakeatinz, pm sent
romoranger, if you're talking about the air dam, I think I do have one, probably a little beat up though. I'll get back to you.

don't have the battery tray or console lid. The car is being parted because it's really not good for anything other than a race car shell at this point since that's what it was and I don't ahve the money or time for a race car right now. The frame is slightly bent from a wreck before my friend bought it, and there's various holes that have been drilled and cut for different reasons. Plus it was originally a v6 car anyway.

 

Would you separate the latches from the doors?

 

trying to keep the doors as complete as possible for now

 

yeah i mean the air dam, sorry it has taken so long to get back to you

 

thanks for reminding me, I had completely forgotten. I do have one but it's pretty scraped and scratched up.

 

list updated

 

sold items removed, some stuff added

 

im interested in the cage. is it all welded together as one piece right now? or does it come apart, and to ship the cage after it is cut up what would that cost? i am very intersted and do have the money so let me know asap, pm me would be the best way to get in touch, thanks

 

How much for the front door speaker covers?... I just bought a z without them..