Ported LT1 heads FS & 236/242 XE cam
12-21-2005 | 03:11 PM
#1
Thread Starter
Registered User
Joined: Nov 2000
Posts: 1,148
From: AZ
Ported LT1 heads FS & 236/242 XE cam
I have a set of ported LT1 heads FS. The heads came on the car when I bought it. I was told the heads flow 27x/19x CFM peak. I don't have a flow sheet, but I will try to get one from the previous owner. The car ran a 12.5 @ 115 basically untuned and and short shifting, so the heads are capable of making pretty decent power. 
Heads and cam both have ~ 2k miles on them.
I'm asking $650 + shipping for the heads and $150 for the cam, or $750 + shipping for both the heads and the cam.
The heads are assembled and ready to bolt on. I *believe* the springs are K Motion K-800 springs, good to .700" lift, and I *believe* the valves are 2.02/1.60.
Pics of the heads are below.
http://myweb.cableone.net/97bowtie/h...eads%20001.jpg
Heads and cam both have ~ 2k miles on them.
I'm asking $650 + shipping for the heads and $150 for the cam, or $750 + shipping for both the heads and the cam.
The heads are assembled and ready to bolt on. I *believe* the springs are K Motion K-800 springs, good to .700" lift, and I *believe* the valves are 2.02/1.60.
Pics of the heads are below.
http://myweb.cableone.net/97bowtie/h...eads%20001.jpg
Last edited by 97bowtie; 12-21-2005 at 06:28 PM.
12-22-2005 | 12:47 PM
#5
Registered User
Joined: Sep 2003
Posts: 546
From: Boerne
Re: Ported LT1 heads FS & 236/242 XE cam
Originally Posted by 97bowtie
Not really looking to trade, but if the right thing came along, maybe. What do you have?
Fully built th350, air shifter, tq arm mount and new tailshaft with speedo sensor for it. It's $2800 in parts. I was looking for $1500 but if you were considering going that direction I'd do a trade + cash. Unless you have any other stuff you could add in???
01-02-2006 | 05:01 PM
#11
Registered User
Joined: Jul 2003
Posts: 166
Re: Ported LT1 heads FS & 236/242 XE cam
