roller,motor,MSD,Converter,nitrous
#1
roller,motor,MSD,Converter,nitrous
I have decided to abandon a project I started a couple of years ago. I have several parts that need to go. I have put prices up but will consider reasonable offers. I can do pictures but they will have to be by request. Several of these parts have never been used. All Parts located in Manhattan, KS. Prefer not to ship larger parts. Will deliver for price of fuel up to 3 hours away. Now for the list:
Forged 383 SBC-$3200 with carb/$3000 without
-2-bolt mains
-ARP main studs and ARP head bolts
-Scat crank and rods
-Mahle Pistons
-Dart Iron eagle heads 200cc runners 64cc chambers
-10.5:1 compression
-Victor jr. intake
-Hydraulic Roller Comp Cams cam. Duration @ .050'' Lift: 242° Intake / 248° Exhaust
Valve Lift w/1.6 Rockers: .584'' Intake / .579'' Exhaust
Lobe Separation Angle: 113°
-Comp Cams retrofit hydraulic roller lifters
-Comp Cams Pushrods
-Crane Gold Roller Rockers
-Holley 650 Double Pumper
-Starter
-Summit SFI certified balancer
Motor has never been fired, all new parts except for the heads(less than 5k), intake and carb(freshly rebuilt with 0 miles).
1991 z28 Roller - sold
-Hotchkis Subframe connectors
-Rear lower control arms
-Centerline telstars 15x4(front) 15x8(back)
-Battery relocation box
-Battery kill switch
-5” monster tach
-Full interior (minus 1 rear lower seat)
-T-top Car
-Cd Player
-4” cowl induction hood
-Mickey Thompson et street radials (275/15R15)
-700r4 trans with shift kit
-10.5” 10 bolt rear with 3.73 gears
-Driveshaft loop
-B&M ratchet shifter
Car was painted Summer of '05. has been garaged the majority ever since. The right rear quater panel has some paint cracking problems right along the wheel well.
NOS TPI Plate Kit - $500
-Plate
-Lines
-Bottle (with guage)
-Fuel and N20 solenoids
-Brackets
-other misc parts
Fuddle Racing Lockup Converter - $350-0 miles
-3200 stall
-700R4 trans
MSD Ignition Stuff
-used 6al box - $190
-Brand New Blaster SS coil and Pro-billet Distributor - $290
-Timing Retard box - $125
I'm sure there are more parts but this is all I can come up with at the moment. Thanks for looking!
Forged 383 SBC-$3200 with carb/$3000 without
-2-bolt mains
-ARP main studs and ARP head bolts
-Scat crank and rods
-Mahle Pistons
-Dart Iron eagle heads 200cc runners 64cc chambers
-10.5:1 compression
-Victor jr. intake
-Hydraulic Roller Comp Cams cam. Duration @ .050'' Lift: 242° Intake / 248° Exhaust
Valve Lift w/1.6 Rockers: .584'' Intake / .579'' Exhaust
Lobe Separation Angle: 113°
-Comp Cams retrofit hydraulic roller lifters
-Comp Cams Pushrods
-Crane Gold Roller Rockers
-Holley 650 Double Pumper
-Starter
-Summit SFI certified balancer
Motor has never been fired, all new parts except for the heads(less than 5k), intake and carb(freshly rebuilt with 0 miles).
1991 z28 Roller - sold
-Hotchkis Subframe connectors
-Rear lower control arms
-Centerline telstars 15x4(front) 15x8(back)
-Battery relocation box
-Battery kill switch
-5” monster tach
-Full interior (minus 1 rear lower seat)
-T-top Car
-Cd Player
-4” cowl induction hood
-Mickey Thompson et street radials (275/15R15)
-700r4 trans with shift kit
-10.5” 10 bolt rear with 3.73 gears
-Driveshaft loop
-B&M ratchet shifter
Car was painted Summer of '05. has been garaged the majority ever since. The right rear quater panel has some paint cracking problems right along the wheel well.
NOS TPI Plate Kit - $500
-Plate
-Lines
-Bottle (with guage)
-Fuel and N20 solenoids
-Brackets
-other misc parts
Fuddle Racing Lockup Converter - $350-0 miles
-3200 stall
-700R4 trans
MSD Ignition Stuff
-used 6al box - $190
-Brand New Blaster SS coil and Pro-billet Distributor - $290
-Timing Retard box - $125
I'm sure there are more parts but this is all I can come up with at the moment. Thanks for looking!
Last edited by Leif-o; 05-02-2009 at 04:41 PM.
Thread
Thread Starter
Forum
Replies
Last Post
dbusch22
Forced Induction
6
10-31-2016 11:09 AM
armedtrigger
LT1 Based Engine Tech
10
02-24-2015 08:30 PM
Speeds8erM-1
Drag Racing Technique
6
07-18-2002 11:36 PM