I'm sell the motor from TB to oil pan with headers, asking price is $5495 obo. It can be a turn key drop in package if you want, and you will have one very fast lt1 car. this moter power ban is from 6200-8200 making peak at about 7500-7600, HP is around 675 fwhp, best pass is 9.71 @ 138

Motor was just freshened , freash hone, new cam bearings, everthing was recoated, there are 18 passes on this motor

Here are a few pic of the motor

http://community.webshots.com/user/squinn0039

engine specs

B&B valve covers
T&D shaft rockers,1.6 ratio, XL option, oil squirters
new comp springs, 1.55
Manely Ti locks & Ti ret, bead lock style
Manley 5/16 SD valves
GM LT1 cylinder head castings, ported by Modern cylinder head, combustion camber and exhaust port coated
ARP under cut head studs, 12 pt
Smith Bros push rods 5/16 .083 wall cm
Cam Motion solid roller 260/270
Roller master timming set
Crower SD sold rollers, tall style, w/ hipo
CP pistons, .030, CR 15.2:1, .043, 1/16 3 mm, 420 g, top of piston and skits coated
Ferra lightweight tapper piston pins
Eagle H beam rods, w L-19 bolts, 6.125, Teflon coated
Cola forged crank, 3.625, Teflon coated
153 tooth alum flex plate
ATI alum balancer, 6.375
Holley hal effect crank trigger with custom mount
Diamond billet caps, on all 5
DSS Billet Aluminum Main Support System
Millen std vol, high pressure pump
Billet fab alum 8 qt drag pan, kick out, trap door,Teflon coated
Federal Mogual bearings
LT1 motor plate




block has a half fill of hard block
lifter bores are bushed, cam tunnel is bored ture
block has been completely deburr inside and out
main oil passages have been open up

Intake system

Edelbrock Vic E has been converted to efi
Wilson 100 deg TB adaptor
Wilson 90mm TB with custom linkage
32lb Bocsh injectors run at 85 psi

Headers

Tri-y set up

1 5/8" step to 1 3/4" Y to 2" Y to 3"
all merges are by Burns Stainless
header also have 8 egt ports
headers were built by Specialty Fabrications in Southgate, Michigan
headers were just re coated this year by QC coatings

ALL THE ABOVE IS INCLUDED WITH THE MOTOR

IF YOU BUY MY MOTOR IT INCLUDES A PROGRAM FOR THE FAST ECM


other things that I'm looking to sell with the engine

Fast EFI ECM batch fire with wide band o2 and crank trigger with wheel for $1595

Reson I'm selling my motor is that I'm building a gen I SBC na motor to replace this motor, I just need to go faster

 

still for sale

 

If you decide to part the motor out, I'd probably be interested in the heads!

Zach

 

I would like to sell the heads and shaft rocker together

 

got any info for me steve

Lt16spdz28@aol.com

 

What info are you looking for Jeff

 

shipping, tracking. and installed pics

 

can you spray this it ??

 

Whatcha up to Jeff?

Dave

 

ttt for steve


he just happened to post up a lil something that i happened to be wanting just after mikey hit me up for his SR

 

Sweet an LTX Manifold.

Dave

 

Don't think so, as the ring gaps are set up kinda tight for spray

 

motor is still for sale

 

I sent u a pm