1997 Camaro Z28 Stock Style Suspension Racecar
NMCA Drag Radial or EFI Legal
PSCA Limited Street, True Street, or Wild Street Legal
PRO/NSCA Xtreme Street Legal
LS1Tech Racing Series Legal

Camaro Pic


Exterior is White – Chassis Only Has 24k Miles
Car will not include Alumastars or M/T skinnies and slicks
Complete Body
Car will be without Motor or Transmission
Paint is in Excellent Shape.
T-Tops
Tinted Windows
Interior is Charcoal Gray – Complete except Carpet and Headliner
Original Hound’s-Tooth Rear Seats Included
M6 Console


Chassis:

- Custom Brad Hadman Progressive Metal Craft ChromeMoly Rollcage Certified to 7.50 till 2-06
- Cage Goes Through the Firewall, Through the Strut Towers and Up to the Frame Horns
- PA ChromeMoly K-Member
- PA ChromeMoly A-Arms
- Tubular ChromeMoly Sub Frame Connectors w/ Additional Boxed Bracing to Inner Pan
- (New) Pinto Style Manual Steering Rack w/ adjustable Bump Steer Ends
- Glasstek Dzus Fastened 4" Cowl Hood, Painted to match the car
- (New in box) Ed Quay Sheet Metal Pro Strut Wing
- Cowl is cut and molded to Firewall
- All Engine Bay Holes filled, Engine Bay Painted Gloss White like Rest of Car
- Heater/AC hole in firewall Covered/ Welded/ Painted to be One Piece w/ Firewall
- (New) 2 Sparco Racing Seats, with Sliding Brackets
- Stroud Parachute w/ Removable Parachute Mount
- (New) Stroud Parachute Release Cable
- (New) Aerospace Drag Brakes on All 4 Corners
- Converted to Manual Brakes
- (New) Wilwood Manual Master Cylinder
- Solid Tubular ChromeMoly Motor Mounts for LT1/SBC/BBC

Suspension:

- Wolfe Racecraft ChromeMoly Torque Arm
- Wolfe Racecraft Solid Anti-Roll Bar
- Custom 76" Pro Stock Type Wheelie Bars (Powdercoated Black)
- Custom Easy Adjustment Spohn ChromeMoly Spherical-Rod End Lower Control Arms
- (New) ChromeMoly Rod End Adjustable Pan Hard Rod
- (New) QA1 Coilover Front Shock/Spring Package
- (New) QA1 Rear Shocks
- OEM Z28 Convertible Rear Springs

Rear-end:

- Custom Narrowed 9" Rear-end
- (New) Strange Ultra Case w/ a 3.250" pinion bore and a 35 spline aluminum spool and 12 bolt pinion support.
- Lamb style racing flanges.
- (New) 3.89:1 Ring and Pinion Set / 9310 Steel
- (New) Strange Aluminum Spool and 12 Bolt Pinion Support
- (New) Moser Gundrilled and Flange Lightened 35 Spline Axles
- (New) Aluminum 35 Spline Strange Spool
- Entire Rear End Powder Coated Black

Electrical:

- (New in box) Painless Wiring 12 Circuit Streetcar/Drag Race Wiring Harness -
- (New) Autometer 2 5/8" Ultra Lite Aluminum Gauges (Oil Psi, Fuel Psi., Water Temp, and Voltage) –
- Autometer ProComp 5” Pedestal Mount Tach w/ Recall, 9000 RPM
- Gauges Mounted in Factory Location in Custom Carbon fiber Panel, Behind Factory Glass
- (New) Rear Mounted Aluminum Sealed Battery Box
- (New) Flaming River Push Off Battery Master Switch

Fuel System:

- (New) Charged Air Systems Fabricated Aluminum Fuel Tank w/ Rear Sump
- (New) Aeromotive Billet Filters Pre-Pump and After Pump
- (New) Product Engineering Y-Block
- (New in box) 20feet of each> -10AN Supply Line, -8AN Return Line
- (New) – 2 feet -12AN Sump Line
- Earls and Aeroquip Fittings and Adel clamps



$16,000 or Consider Trade

 

to the top

 

to the top

 

to the top

 

to the top

 

to the top

 

still available

 

to the top

 

to the top

 

to the top

 

to the top

 

to the top

 

you could probably part it and make some cash

 

Could, but this car is way too far along to even consider parting out.

 

to the top