Still More Aftermarket (Reduced Prices)
06-09-2007 | 09:08 PM
#1
Thread Starter
Registered User
Joined: Jan 2002
Posts: 990
From: Sac to SoCal
Still More Aftermarket (Reduced Prices)
Please apply 3% Paypal Fees to all parts
Might be willing to trade some parts for Vortech 7" or 6.66" pulleys, T- Trim head unit, or an inter or aftercooler setup.
)Lloyd Elliott ported Trickflow heads with Ferrea valves.
Flow:
.2 136/112
.3 200/155
.4 251/184
.5 278/199
.6 291/214
.650 296/221
.7 298/225
Brand new $2100 OBO Plus shipping.
)Lloyd Elliott ported LT4 intake. Set up for a monoblade but will fit the 58mm fine too. $500 plus shipping OBO.
)Brand new RK sport mids and ORY (both coated) EGR tube is welded shut. These are already packaged and ready for shipping. They were previously sold but that didn't work out. ($310 plus shipping)
)Brand new Holley 58mm TB, has the brushed finish on the TB plate. ($300 plus shipping).
)Ram air hood WS6 LT1 style Red in color but could use a paint job. Still in the box that I got it from through the original user. SOLD to 94FBird.
)LE2 Camshaft $210 shipped.
)Comp Cam Pro Mag 1.6 NSA For 7/16" studs. One rocker has a knick on the outer body that surrounds the roller tip (should not hamper performance). Used condition SOLD to 1BigBird3.
)Trickflow pushrods SOLD to 1BigBird3.
)Brand New Milodon Oil Pan. Only installed. Don't know the model # but it has the shape of the stock pan. Make an offer.
)LT1 OBD1 conversion PCMforless PCM. Set up for a 383 with LE2 cam and much more. I think I paid $250 or more, make an offer.
)Cloyes Double Roller Timing chain and clearanced & plugged TC Cover for those switching to an elec. waterpump. $120 plus shipping.
)Flowmaster exhaust, tips are oval style. Just removed it from my 96, it is used and has some dents, was cut up for removal. No problem with the sound, however. $90 plus shipping OBO.
Pics ------>
http://s114.photobucket.com/albums/n269/ponyackn/
Might be willing to trade some parts for Vortech 7" or 6.66" pulleys, T- Trim head unit, or an inter or aftercooler setup.
)Lloyd Elliott ported Trickflow heads with Ferrea valves.
Flow:
.2 136/112
.3 200/155
.4 251/184
.5 278/199
.6 291/214
.650 296/221
.7 298/225
Brand new $2100 OBO Plus shipping.
)Lloyd Elliott ported LT4 intake. Set up for a monoblade but will fit the 58mm fine too. $500 plus shipping OBO.
)Brand new RK sport mids and ORY (both coated) EGR tube is welded shut. These are already packaged and ready for shipping. They were previously sold but that didn't work out. ($310 plus shipping)
)Brand new Holley 58mm TB, has the brushed finish on the TB plate. ($300 plus shipping).
)Ram air hood WS6 LT1 style Red in color but could use a paint job. Still in the box that I got it from through the original user. SOLD to 94FBird.
)LE2 Camshaft $210 shipped.
)Comp Cam Pro Mag 1.6 NSA For 7/16" studs. One rocker has a knick on the outer body that surrounds the roller tip (should not hamper performance). Used condition SOLD to 1BigBird3.
)Trickflow pushrods SOLD to 1BigBird3.
)Brand New Milodon Oil Pan. Only installed. Don't know the model # but it has the shape of the stock pan. Make an offer.
)LT1 OBD1 conversion PCMforless PCM. Set up for a 383 with LE2 cam and much more. I think I paid $250 or more, make an offer.
)Cloyes Double Roller Timing chain and clearanced & plugged TC Cover for those switching to an elec. waterpump. $120 plus shipping.
)Flowmaster exhaust, tips are oval style. Just removed it from my 96, it is used and has some dents, was cut up for removal. No problem with the sound, however. $90 plus shipping OBO.
Pics ------>
http://s114.photobucket.com/albums/n269/ponyackn/
Last edited by ponyackn; 07-23-2007 at 07:15 PM.
06-10-2007 | 03:15 AM
#2
Registered User
Joined: Jun 2003
Posts: 583
From: $oCal Goodne$$
Please apply 3% Paypal Fees to all parts
)Lloyd Elliott ported Trickflow heads with Ferrea valves.
Flow:
.2 136/112
.3 200/155
.4 251/184
.5 278/199
.6 291/214
.650 296/221
.7 298/225
Brand new $2100 OBO Plus shipping.
)Lloyd Elliott ported LT4 intake. Set up for a monoblade but will fit the 58mm fine too. $500 plus shipping OBO.
)Brand new RK sport mids and ORY (both coated) EGR tube is welded shut. These are already packaged and ready for shipping. They were previously sold but that didn't work out. ($310 plus shipping)
)Brand new Holley 58mm TB, has the brushed finish on the TB plate. ($300 plus shipping).
)Ram air hood WS6 LT1 style Red in color but could use a paint job. Still in the box that I got it from through the original user. $320 plus shipping.
)LE2 Camshaft $210 shipped.
)Comp Cam Pro Mag 1.6 NSA For 7/16" studs. One rocker has a knick on the outer body that surrounds the roller tip (should not hamper performance). Used condition $125 shipped.
)Trickflow pushrods $60 shipped.
)MSD 8.5's Pre-cut Wires brand new. $85 shipped
)Brand New Milodon Oil Pan. Only installed. Don't know the model # but it has the shape of the stock pan. Make an offer.
)LT1 OBD1 conversion PCMforless PCM. Set up for a 383 with LE2 cam and much more. I think I paid $250 or more, make an offer.
Pics ------>
http://s114.photobucket.com/albums/n269/ponyackn/
)Lloyd Elliott ported Trickflow heads with Ferrea valves.
Flow:
.2 136/112
.3 200/155
.4 251/184
.5 278/199
.6 291/214
.650 296/221
.7 298/225
Brand new $2100 OBO Plus shipping.
)Lloyd Elliott ported LT4 intake. Set up for a monoblade but will fit the 58mm fine too. $500 plus shipping OBO.
)Brand new RK sport mids and ORY (both coated) EGR tube is welded shut. These are already packaged and ready for shipping. They were previously sold but that didn't work out. ($310 plus shipping)
)Brand new Holley 58mm TB, has the brushed finish on the TB plate. ($300 plus shipping).
)Ram air hood WS6 LT1 style Red in color but could use a paint job. Still in the box that I got it from through the original user. $320 plus shipping.
)LE2 Camshaft $210 shipped.
)Comp Cam Pro Mag 1.6 NSA For 7/16" studs. One rocker has a knick on the outer body that surrounds the roller tip (should not hamper performance). Used condition $125 shipped.
)Trickflow pushrods $60 shipped.
)MSD 8.5's Pre-cut Wires brand new. $85 shipped
)Brand New Milodon Oil Pan. Only installed. Don't know the model # but it has the shape of the stock pan. Make an offer.
)LT1 OBD1 conversion PCMforless PCM. Set up for a 383 with LE2 cam and much more. I think I paid $250 or more, make an offer.
Pics ------>
http://s114.photobucket.com/albums/n269/ponyackn/
Talk about hindsight being 20/20!
Install those Rk's so you have room for the intercooler! Unless your going the FMIC route!I'll take the Rockers and Pushrods! Want to Rock Paper Scissors for the Intake?
Ruben F.
06-10-2007 | 02:49 PM
#4
Thread Starter
Registered User
Joined: Jan 2002
Posts: 990
From: Sac to SoCal
Post pics man of the wash gathering since my inept **** doesn't know how to
94 6-speed, the hood is suncoast I believe. I'm not the original owner and I never got a chance to even use it on my car. No damage but could use a new paint job, the original owner shave some off a section over the PS headlight area but it's not too noticeable.
06-12-2007 | 12:37 AM
#10
Thread Starter
Registered User
Joined: Jan 2002
Posts: 990
From: Sac to SoCal
Dnsean, pics of the intake have been uploaded to my photobucket.
The 1.6 promags are pending payment.
The ram air hood is pending the decision/payment from the person who first contacted me which was through pm.
I'd rather keep the specs on the LE2 cam under wraps until someone commits to buying. However, pics are in the photobucket page in my first post. Pretty firm on the price, I've dropped it already several times but might be willing for trade and cash.
The 1.6 promags are pending payment.
The ram air hood is pending the decision/payment from the person who first contacted me which was through pm.
I'd rather keep the specs on the LE2 cam under wraps until someone commits to buying. However, pics are in the photobucket page in my first post. Pretty firm on the price, I've dropped it already several times but might be willing for trade and cash.
07-24-2007 | 02:28 AM
#13
Registered User
Joined: Jan 2005
Posts: 683
From: Bullhead City, AZ
Could I get a pic of the Double Roller and clearanced cover to : Gentner_Z28@hotmail.com
07-24-2007 | 11:45 PM
#15
Thread Starter
Registered User
Joined: Jan 2002
Posts: 990
From: Sac to SoCal
Sinister95Z, pics are uploaded onto my photobucket album: http://s114.photobucket.com/albums/n...ackn/?start=60