Stock 1996 parts.. Air intake, springs, and more...

Thread Tools
 
Search this Thread
 
Old 02-06-2004 | 11:02 AM
  #1  
LWillmann's Avatar
Thread Starter
Registered User
 
Joined: Nov 2002
Posts: 1,831
From: Middle Tennessee
Stock 1996 parts.. Air intake, springs, and more...

I have the stock air intake stuff that came off when I installed the SLP CAI. This is from the MAF out to the fender, MAF NOT included. It's tube from the MAF to the airbox, the airbox, and the part that directs air INTO the air box. I'd like to get $15 for it without the filter. The only problem with the entire setup is that on the air box one of the things that the metal clip holds on to is busted off so you have to adjust how that metal clip holds.

K&N filter for the stock airbox, $20 I used it for about 6 months before going to the CAI. I'll even clean and recharge it for the purchaser. SOLD!

1996 stock y-pipe WITH both cats in tact. GONE!!

1996 AIR pump - $10 currently without bracket, but that will change in future.

1996 AIR pump solenoid or sensor thing- $5

1996 Stock front and rear springs. My car sat 1" LOWER on the stock springs than it does now. Don't buy expensive lowering springs when these stockers do it for WAY LESS... $30 for the full set. The measurement from ground to top of wheel arches was 26-3/4" in the front, and 26-3/4" in rear with 100 lb speaker box in trunk.

1996 2.73 gear set w/ posi. SOLD!!

I also have two speaker boxes that are no longer being used. They are NOT F-Body boxes though:

Box 1 is a bandpass box, for two 12" subs. Box provided GREAT sound with loud bass! I'd like $25, there's really nothing wrong with it, we just aren't using it anymore.

Box 2 is a dual 12" ported box. 1.25 cubic feet per sub. It's tuned to around 40 Hz or so. Box sounded great. We upgraded to a single 15" sub and don't want this one anymore. $25 for this one too.

Boxes are sold empty, without subs.

I also have a single 12" RF Punch HE sub. Brand new and still in the box. Box opened only to inspect. $25... SOLD (pending payment)

I have a small (very small) 2 channel Jensen amp (18w RMS per channel) for sale as well. It's a Jensen, and was used in two of my cars. I never had any problems with it. Worked last time I had it hooked up. $5

Shipping is NOT included in these prices.

I am open to offers on most of this stuff, so feel free to try.

I have sold stuff here before, and bought stuff here too...

Last edited by LWillmann; 03-22-2004 at 02:45 PM.
Old 02-08-2004 | 10:16 AM
  #2  
LWillmann's Avatar
Thread Starter
Registered User
 
Joined: Nov 2002
Posts: 1,831
From: Middle Tennessee
ttt
Old 02-08-2004 | 12:00 PM
  #3  
96ltz's Avatar
Registered User
 
Joined: Jun 2002
Posts: 243
From: TN
I'll take the ypipe and posi. just tell me when we can meet
Old 02-08-2004 | 08:18 PM
  #4  
LWillmann's Avatar
Thread Starter
Registered User
 
Joined: Nov 2002
Posts: 1,831
From: Middle Tennessee
Where are you located?

I live in Sparta, so I need to know where you plan to meet before I can decide when we'll meet.
Old 02-08-2004 | 09:20 PM
  #5  
96ltz's Avatar
Registered User
 
Joined: Jun 2002
Posts: 243
From: TN
Sent you a PM
Old 02-14-2004 | 04:27 PM
  #6  
LWillmann's Avatar
Thread Starter
Registered User
 
Joined: Nov 2002
Posts: 1,831
From: Middle Tennessee
ttt
Old 02-19-2004 | 11:06 PM
  #7  
joshcaro's Avatar
Registered User
 
Joined: Nov 2003
Posts: 133
Did you cut the springs? Or are they actually the "stock" springs?
Old 02-19-2004 | 11:56 PM
  #8  
RE AND CHERYL's Avatar
Registered User
 
Joined: Oct 2003
Posts: 2,140
From: DOVER DE
How much for the springs shipped to Dover DE 19901?

Do you take Pay Pal?

REANDCHERYL@MSN.COM
Old 02-20-2004 | 07:22 AM
  #9  
LWillmann's Avatar
Thread Starter
Registered User
 
Joined: Nov 2002
Posts: 1,831
From: Middle Tennessee
I did not cut the springs at all, as far as I know they are completely stock. They still had the factory tags on them when they came out of the car, but in handling them the tags came apart and off the springs.

EDIT:

Looks like about $20 to ship them.

Last edited by LWillmann; 02-20-2004 at 07:29 AM.
Old 02-25-2004 | 03:43 PM
  #10  
LWillmann's Avatar
Thread Starter
Registered User
 
Joined: Nov 2002
Posts: 1,831
From: Middle Tennessee
ttt
Old 03-12-2004 | 09:39 PM
  #11  
redlt1camaro2k2's Avatar
Registered User
 
Joined: Dec 2002
Posts: 31
From: Decatur, Al
i am intersted in the parts from the MAF to the airbox if you have it.
Old 03-12-2004 | 10:33 PM
  #12  
LWillmann's Avatar
Thread Starter
Registered User
 
Joined: Nov 2002
Posts: 1,831
From: Middle Tennessee
If that was you that emailed me about it earlier, you have mail.

If that wasn't you, then that person has 1st dibs.. Cool?
Old 03-13-2004 | 12:05 AM
  #13  
redlt1camaro2k2's Avatar
Registered User
 
Joined: Dec 2002
Posts: 31
From: Decatur, Al
that was me. i just emailed you back a question and addy. 20 bux works. i just wanted to know if it had the connectors for both sides, to the MAF and to the airbox?
Old 03-22-2004 | 07:36 AM
  #14  
LWillmann's Avatar
Thread Starter
Registered User
 
Joined: Nov 2002
Posts: 1,831
From: Middle Tennessee
Still for sale.


Stereo stuff prices lowered... Cut in HALF actually...

Last edited by LWillmann; 03-22-2004 at 07:39 AM.
Old 03-22-2004 | 02:45 PM
  #15  
LWillmann's Avatar
Thread Starter
Registered User
 
Joined: Nov 2002
Posts: 1,831
From: Middle Tennessee
marked a couple of things sold.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
oldschool
Parts For Sale
16
02-09-2016 09:21 PM
thenewkid
New Member Introduction
5
11-27-2014 09:41 AM
BIGCOWL-IMP
Midwest
0
11-21-2014 09:40 AM
slothgrant
Car Audio and Electronics
0
08-22-2002 03:01 PM
DubbyZ28Camaro
Car Audio and Electronics
2
08-04-2002 12:53 PM



Quick Reply: Stock 1996 parts.. Air intake, springs, and more...



All times are GMT -5. The time now is 12:21 PM.