well i decided i wanna go t56 with a spec clutch and 4.30 gears...the cruising to town at 3200 RPM got old real quick so i am selling the kit...it has a little over 3k miles on it, has the mount for the t/a (if you need it) a crosmember, TCI 3500 stall, flexplate, B&M pro stick shifter, TCI street fighter trans, console shift plate custom made by me and a shifter mount so you bolt in and go. if you have a t56 and want to swap we can arrange that too...depending on what you have. anyway ill sell the kit for $1200 with EVERYTHING you need. willing to ship at buyers cost everything is in great shape and hasnt been abused but i have run it at the track a few times wit this but theres NO slip at all and it it a VERY solid setup. its a auto/manul VB with adjustable modulator and i WILL help you hook ANYTHING up if im needed

 

where are you located?

 

no trans brake?

 

no to trans brake and im located in Lynchburg, va if i have to keep it i will be going with a transbrake though

 

shipping quote to pasadena, tx 77503 please. Also pics to chevyracing4194@yahoo.com Very interested
Thanks, Brian

 

it will be $1k shipped..the crate fees here are redic and i dont have as=ccess t any crates so the shipping company will have to make one

 

also it isnt out of the car yet but i have some of the shifter and everything

 

oh i forgot it does include the lokar dipstick

 

Clean installation. Whats the "mount for a T/A"? Does it have the setup to make the speedo work? Will i need a different drive shaft?

 

stock drive shatf will work.the torque arm bracket is what i was talking about, i have a mid mount and didnt need this but i bought it before so i put it on.i can tune the PCM for you if you send it to me and send you the wiring diagram. this trans picked me up 3/10's in the 1/8th mile over my 4l****tyE with a 3k stall BTW before i was running 8.1x with a best of 1.77 60 then the th350 swap took it to a 7.9x 7.8x.i have sprayed this tranny with a 125 shot and it went 7.20's (1.67 60' spining), VERY solidly...it only saw 2 nitrous passes unfortunately before i sold the kit. but i will send everything you need to make the speedo and cruise to work im one of few that have done it and ill be glad to help ya! i just want a t56

 

Bah where was this 3 months ago! Its a great price guys i have almost double that in my th350 setup! Good luck with the sale!

 

I was referred to this thread by another member because i am interested in doing a th-350 swap.. The only problem i see is that most parts you have probably will not swap over to a thirdgen 1992 camaro. The stock driveshaft should work as long as the tail shaft is 9 inches. I have a electronic speedometer and don’t know if this would work or not without buying more parts. Anyway let me know.
Thanks

 

i have a speedometer bullet and gear in there for use with them, and a sender ($24) from dakota digital it has th 9" tail and a 4th gen d/s (that will fit yours) basically you get everything you need b/c i have the relocation bracket for stock crosmember on thirdgens b/c i made my own so minus the console plate everything will work, and if you send me yours marked i will cut it to work or i can have one milled out of billet for a small price. if someone buys this i will include the tach and shift light too for a extra $50...i want this gone PLEASE help me get my t56 btw the speedo gear is setup for 4.10s and a 26" tall rear tire. but i can swap the gear out for what ever gear/tire you want

 

oh yeah the stall is double drilled to work with a number of different flex plates.

 

very interested in this set up-I am located in harrisonburg va.please call me at 540-578-5829.-robert