Welcome to the Candy Store! Moving to California, so must build a smog motor. Everything approx 10K miles and excellent condition. Please don’t ask me questions about these parts unless you are serious. Prices are firm. Email link broken! Email: jmatlock88@***.net
Serious buyes please-- No trades accepted.

All remaning items will go to ebay next week.

300 BBK 58mm Polished and smoothed (no ugly vacuum nipples) Throttle body --this looks awesome!

200 30# SVO Injectors

225 Extreme Energy Comp Cam 224/224 560/560 110

225 Retro-fit Roller Lifters (roller lifters for older blocks!)

225 Crane Race Gold Roller Rockers 1.6

40 Hardened Pushrods

75 Moroso Deep Pan

400 Coated Supercomp Longtubes

150 ACT lockup converter ~2300

40 Accel Supercoil with GM adapter harness

40 Polished Alum Plug wire looms

65 Polished Alum Corvette Valve covers

150 Ed Wright Dyno-tuned Chip (best if you buy heads/cam) or 120 with your chip/memcal

50 SFI Approved Flexplate (2 piece rms, 153 tooth)

150 SFI Approved Damper NICE

150 MAP, CTS, MAT, heated O2, knock, TPS (VERY few miles on all! 02 alone was $75 TPS was $40 etc!)

TRC-2 Boost/NOS Timing Retard Module for use with Crane HI boxes. $95

Adjustable TPS-Sensing Wide Open Throttle Switch for Nitrous Systems $40

One Piece Polished Alum timing chain cover w/ bolts $50

Grey Leather 1998 Trans Am front and rear seats. Excellent condition, buyer pays shipping $500

 

How much you want for the throttle body?



Pics? to jarteaga@mail.com

 

you have more info on the tps wot switch? where does it mount? does it tap into the tps wires? pictures? thanks

 

Do you have a y-pipe in that pile?

 

Stang, $300 for the throttle body as it says in the ad. I will be sending pictures to your email that I took yesterday. I had $100 worth of machining, filling, and polishing done on this unit. It has approx 6k miles and looks awesome.

It is a Matt Paul Adjustable TPS Sensing Switch. The switch uses an op amp comparator circuit and is adjustable for use with 0-5V TP sensors. You can mount it anywhere where it is fairly protected from the envionment. I had mine mounted under the dash near the ECM and tapped into the TPS wire at the ECM plug. This is a great way to keep your nitrous system hidden from sight or to help eliminate engine bay clutter associated with a switch and wiring.

Sorry, no ypipe.

 

The converter is it the stock size? or is it smaller? Interested let me know...

 

8.5" Diameter...(smaller)

 

Pics of the "65 Polished Alum Corvette Valve covers". Does the 65 stand for 1965? ....if not are these center bolt? ...if so, how much?

 

can i get a few pics of the TB?

 

You sure 8.5? and not 9.5... Anyway send me a pic very interested...have $$

 

Interested in the wirelooms and the moroso oil pan. Please email pictures to kendall@akdns.org.

Thanks.

 

I'm interested in the valve covers. Will they fit an LT1? If so, could you send me a picture at mf255201@ohio.edu Thanks!

 

Just FYI, you're 224 Cam will make it here in Cali.

 

Valvecovers, Pan, and Wire Looms are sold.

58mm Throttle Body and 9.5" Torque Converter still available.

Picture

http://www.thirdgen.org/classifieds/.../ACFu8gVK5.JPG

I'll take pictures of the torque converter later today.

What are the exact laws on cam sizes? The roller valve train setup is currently on ebay.

 

I am looking for a 58mm TB. Does this have the IAC mod??? The unit looks really good. Can you send me a front pic of it?

Do you accept paypal? Would you do $300 shipped??

Let me know.

hotrodn350@hotmail.com

What is the PN? I have a 95Z. BTW, am I first in line, or has there been other offers?

Thanks!