stereomandan

I would never buy a cross drilled rotor unless it was purely for show.

Slotted are cool and perform well in the rain. They take away a minimal amount of braking power due to the slots in dry weather. I like the look too.

I'm getting solid rotors with my C5 upgrade, and I'll see how they perform in the rain. If they don't work well in the rain, I'll get slotted.

Dan

DiabloGT

so on this page:
http://motors.search.ebay.com/93-cam...aspiZ2QQsojsZ0
which rotors would you guys recommend as the best? because there all mostly drilled though and are there any with zinc plated that are only slotted?

stereomandan

Powerslot rotors are slotted and zinc coated. You can find them at www.thunderracing.com and at www.tirerack.com They cost a lot though. It depends on how much you want to spend.

On the Ebay site, I would probably chose:
http://cgi.ebay.com/ebaymotors/ws/eB...950511122&rd=1

Dan

DiabloGT

Do you think theres a big difference between the ebay ones and power slot, because the powerslot are like $400

Knowklew

Autozone rotors and some good pads will do the trick for ya.

stereomandan

Probably not. Personally, I would buy the Ebay ones.

Rotors can warp, even the best rotors can warp, so may as well give something a try that's a little less expensive. My 2 cents.

Dan

LPE_wannabe

power slot makes rotors called "pro stops" that are slotted and have dimples in them to make it look like cross-drilled...i was looking at maybe getting those??? http://www.thunderracing.com/catalog...&vid=3&pcid=21

RE AND CHERYL

I wouldn't buy cheap drilled rotors or you will regret it. Most of them have no warrenty and will crack between the holes within months. Although I can't fine him anymore, I bought my Powerslot rotors from THIS Ebay seller for $350 for all four. He even shipped me C5 front and LT1 rear rotors. I have abused the **** out of these rotors and have yet to warp them.

RE AND CHERYL

Just looked at the web site. Nothing really on it. Give him a call(# on the site). I called him when I bought mine and he said he drop ships so It dosn't matter if he stocks it or not.

LPE_wannabe

so you think that even the Brembo cross-drilled rotors would have cracking problems between the holes even with Brembo's high-quality products??? i was just wondering cause you wold think if you pay 4 or $500+ for rotors that they wouldn't have problems like that??? thanks

Shempy

The minute you drill into any rotor, you weaken it. Whether it's the casting or metallurgy, the plain Brembos seem to stand up well to real abuse.

How to know if slotted/drilled rotors are for you:

Are you going to run them for open track road course events? (If yes, don't buy, if no, continue)

Are you going to autocross them? (If yes, don't buy, if no, continue)

Is it unacceptable to know that you cannot "turn" or "cut" the rotors in the event that they warp or you wish to mate them to a new pad? (If yes, don't buy, if no, continue)

Do you prioritize function over form? (If yes, don't buy, if no, continue)

Do you mind paying more for an inferior product? (If yes, don't buy, if no, continue)

Do you like to buy things because they look or sound cooler than they really are? (If yes, and you made it this far, blingin' cross-drilled and slotteds are for you.)

Hope that handy guide helped.

TransAm396

lol..good way to look at it....allthough i think slotted would be a good choice over drilled..get the LS1 front brake kit and get slotted..i wouldnt trade my for the world

LPE_wannabe

that's funny lol...what's the LS1 front brake kit??? i guess i'll just get slotted since everybody says crossdrilled sucks lol...thanks guys