g-force/pete Z bars, any breakage?
#1
g-force/pete Z bars, any breakage?
I have been looking into getting these and doing a lot of searching and research. I have read a bunch of suggestions to keep the T/A "just in case" something breaks but I haven't ready about breakage. Since I have almost no budget I was thinking about swaping the axle tubes from one of my spare 10 bolts to a ford 8.8 housing and running these without the T/A. but need to be sure that they have been run through their paces over the years without breakage first...
So who has run them and what is your experiance with them?
So who has run them and what is your experiance with them?
#2
I have been looking into getting these and doing a lot of searching and research. I have read a bunch of suggestions to keep the T/A "just in case" something breaks but I haven't ready about breakage. Since I have almost no budget I was thinking about swaping the axle tubes from one of my spare 10 bolts to a ford 8.8 housing and running these without the T/A. but need to be sure that they have been run through their paces over the years without breakage first...
So who has run them and what is your experiance with them?
So who has run them and what is your experiance with them?
#3
Ask this question on www.classracer.com. A lot of the Stock Eliminator guys run Pete Z bars.
#4
Ed Quay used to make some too I think
#5
thanks for the info, but It doesn't see the street much and the more mods I do the less street time she gets...
Thread
Thread Starter
Forum
Replies
Last Post
PFYC
Supporting Vendor Group Purchases and Sales
0
08-05-2015 08:35 AM