help choosing the right lower control arms for the rear
07-08-2006, 10:45 PM
#16
Registered User
Join Date: Dec 2000
Location: NYC, NY
Posts: 776
Re: help choosing the right lower control arms for the rear
build them yourself and save some money, if you're concearned about NVH use a rubber bushing like the one mentioned on this page. Won't get a better or cheaper setup than that.
http://www.jonaadland.com/Z28/Mods/L...minumLCAs.html
Personally I use double rod ends and although it is louder when you hit joints and bumps i don't have a problem with them, some do. Figure that during daily driving the rod ends will last 2-3 years assuming you use the ones Jon mentions on the his page. covers "should" lengthen that further.
http://www.jonaadland.com/Z28/Mods/L...minumLCAs.html
Personally I use double rod ends and although it is louder when you hit joints and bumps i don't have a problem with them, some do. Figure that during daily driving the rod ends will last 2-3 years assuming you use the ones Jon mentions on the his page. covers "should" lengthen that further.
07-09-2006, 01:31 PM
#17
Registered User
Thread Starter
Join Date: May 2005
Location: Colorado
Posts: 2,161
Re: help choosing the right lower control arms for the rear
wow, that was a great website... I think I may actually look into doing it myself versus buying a set... Very good reading!
THANKS!
~Cody
THANKS!
~Cody
Thread
Thread Starter
Forum
Replies
Last Post