LT1 Spindle fit LS1 car?
#1
LT1 Spindle fit LS1 car?
Would a spindle from an LT1 car fit and LS1 car?
The reason I ask is because I thought a little kid ran out in front of me so instead of hitting him I chose to hit the curb and drive up on the sidewalk.
Ended up just being a blue balloon floating across the road bouncing along. (Hey it was dark....cant be too careful. I do it again.)
So now I cant align my front exactly proper since the spindle is bent a little. The little bolt on the bottom wont slide any farther(to align the passenger side)
I found a good deal on a spindle from an LT1 car on ebay.
BTW when they say right side they mean passenger right? (lol why cant they just say driver or pass. side? duuuhh)
And is there anything else I might want to replace while its apart? Im a loyal follower of the "If it aint broke, fix it while your there" crowd.
Thanks guys
-Chris
The reason I ask is because I thought a little kid ran out in front of me so instead of hitting him I chose to hit the curb and drive up on the sidewalk.
Ended up just being a blue balloon floating across the road bouncing along. (Hey it was dark....cant be too careful. I do it again.)
So now I cant align my front exactly proper since the spindle is bent a little. The little bolt on the bottom wont slide any farther(to align the passenger side)
I found a good deal on a spindle from an LT1 car on ebay.
BTW when they say right side they mean passenger right? (lol why cant they just say driver or pass. side? duuuhh)
And is there anything else I might want to replace while its apart? Im a loyal follower of the "If it aint broke, fix it while your there" crowd.
Thanks guys
-Chris
Last edited by stone4779; 01-15-2005 at 04:40 AM.
#6
Re: LT1 Spindle fit LS1 car?
Originally Posted by stone4779
Naw someone else might be wondering the same thing so I'll leave it for them to find if they are smart enough to "search" lol
#7
Re: LT1 Spindle fit LS1 car?
Originally Posted by AL SS590 M6
Well beings that this has nothing to do with engine tech we'll leave it elsewhere.
so sorry for being normal Must have forgotten to put on my "perfect" hat.
Last edited by stone4779; 01-16-2005 at 09:44 PM.
#8
Re: LT1 Spindle fit LS1 car?
Originally Posted by stone4779
so sorry for being normal Must have forgotten to put on my "perfect" hat.
#9
Re: LT1 Spindle fit LS1 car?
Originally Posted by AL SS590 M6
Normal has nothing to do with it. It has to do with being able to read and comprehend english. The "LS1" section that you talk about is the LS1 ENGINE TECH section. And as stated in the "read me BEFORE posting thread it is spelled out in the afore mentioned plain english that the sole purpose of the LS1 engine tech section is for, yep you guessed it, LS1 ENGINE technical questions. Front spindles are NOT engine parts.
I fully understand where your coming from but people post questions about LS1 cars here all the time....figured why not, because I would get a faster response.
Its in the past now though.... no hard feelings
I know you personally have chimed in on some of my threads with valuable information, and you probably have to put up with a lot of crap that I can just ignore...so you have the right to be a little snappy here and there. Its just the "" that got me at the time lol. (These smileys sure can be destructive lol)
(BTW I totally forgot that there was a suspension section lol....I thought you moved it to general tech )
Peace
EDIT: I just wanted to say that after reading your posts above, and mine....you and I would get along just fine in real life. I wish you lived in Houston we'd hang out and pick away at eachother lol.(Genuinely)
Last edited by stone4779; 01-18-2005 at 09:04 PM.
Thread
Thread Starter
Forum
Replies
Last Post
TheGreenZ28
Exhaust System
0
12-06-2014 10:23 PM
PFYC
Supporting Vendor Group Purchases and Sales
0
12-04-2014 11:56 AM
ChrisFrez
CamaroZ28.Com Podcast
0
11-23-2014 10:33 AM