Making own stuff, tips please
#1
Making own stuff, tips please
Well i was looking around and decided i'd like to try and make my own panhard rod and lower control arms. Does anyone have any tips or ideas of how i'd go about doing this? what type of metal should i use? Just for kicks and giggles i'd try something with titanium, but that's just a tad too expensive for me.
#2
Re: Making own stuff, tips please
Here is how to make the lower control arms:
http://www.jonaadland.com/Z28/Mods/L...minumLCAs.html
And look here for the panhard bar:
http://www.jonaadland.com/Z28/Mods/PHB/AluminumPHB.html
The maker of those is an engineer and also road-races his car, so you know they are strong enough.
Good luck.
http://www.jonaadland.com/Z28/Mods/L...minumLCAs.html
And look here for the panhard bar:
http://www.jonaadland.com/Z28/Mods/PHB/AluminumPHB.html
The maker of those is an engineer and also road-races his car, so you know they are strong enough.
Good luck.
Thread
Thread Starter
Forum
Replies
Last Post