Need some Crossmember help on a 3rd gen
#1
![Exclamation](https://www.camaroz28.com/forums/images/icons/icon4.gif)
ok, i was backing out of work today and my foot slipped off the clutch and got the awfullest case of wheel hop i have ever witnessed. well it bent the crossmember and pulled a single 1/2" bolt and nut holding the crossmember instead of the 2 3/8" crossmember threads that stick out of the frame because those were snapped off by the previous owner, well now the crossmember is just hanging there and it's making the tranny jump around when i accelerate, kinda like when a tranny mount is broke. is there any way of fixing this? are the factory threads able to be replaced or am i up the creek without a paddle? heres a few pics of what im talking about
![](http://tinypic.com/ke9so1.jpg)
![](http://tinypic.com/keadg9.jpg)
this was the only bolt holding the driving side of the crossmember up
![](http://tinypic.com/keae8h.jpg)
![](http://tinypic.com/keajrd.jpg)
![](http://tinypic.com/ke9so1.jpg)
![](http://tinypic.com/keadg9.jpg)
this was the only bolt holding the driving side of the crossmember up
![](http://tinypic.com/keae8h.jpg)
![](http://tinypic.com/keajrd.jpg)
![](http://tinypic.com/keal8x.jpg)
Last edited by BigRedChevy; 01-17-2006 at 03:42 PM.
Thread
Thread Starter
Forum
Replies
Last Post
cmsmith
2010 - 2015 Camaro News, Sightings, Pictures, and Multimedia
0
07-05-2015 07:23 PM
camaro02DK
Parts For Sale
0
07-05-2015 09:04 AM