Not the typical LCA/PHR questions
#1
Not the typical LCA/PHR questions
If anyone remembers, I posted here about an idea of making an X style PHR. Then someone stated it would cause some really weird roll on the chassis around corners. (This was demonstrated with chopsticks!) So yes I have come back to this idea. The X PHR would definitely stop ALL backwards squat. But...My question is for cornering.
If the X style PHR causes a weird roll when cornering, wouldn't the LCA's stop that by holding the chassis to the axle? I also know this could cause some really bad traction. If the car wanted to roll but couldn't, then the car would bring the axle with it causing bad traction and such. But...I'm just curious as to if the LCA would hold the car and stop it was rolling.
ShibbyZ
If the X style PHR causes a weird roll when cornering, wouldn't the LCA's stop that by holding the chassis to the axle? I also know this could cause some really bad traction. If the car wanted to roll but couldn't, then the car would bring the axle with it causing bad traction and such. But...I'm just curious as to if the LCA would hold the car and stop it was rolling.
ShibbyZ
Thread
Thread Starter
Forum
Replies
Last Post
jasonduaine
Exhaust System
2
03-20-2015 09:00 AM
jasonduaine
LS1 Based Engine Tech
3
03-07-2015 09:44 AM
Hurin
Suspension, Chassis, and Brakes
4
12-13-2014 07:38 PM