Is it possible for my front end alignment to be out by 1"...
#1
Is it possible for my front end alignment to be out by 1"...
....Please help! Is it possible for my front end to be out of alignment by
1"??? When I measure from the front of the front rim and then measure
from the rear of the front rim my front measurment is 1" longer.....
Thanks a bunch everyone ... Bill...
p.s, oh and for all you 'your on the wrong post people', I did post this on
the 'suspension site' but no response due to what I feel is lack of
volume as we just got a have some alignment pro's here {or at least
someone else who HIT A CURB LIKE I DID ...........
1"??? When I measure from the front of the front rim and then measure
from the rear of the front rim my front measurment is 1" longer.....
Thanks a bunch everyone ... Bill...
p.s, oh and for all you 'your on the wrong post people', I did post this on
the 'suspension site' but no response due to what I feel is lack of
volume as we just got a have some alignment pro's here {or at least
someone else who HIT A CURB LIKE I DID ...........
#4
Re: Is it possible for my front end alignment to be out by 1"...
.....Thank You Spinner & Shoebox . I'll take a look at the spindle tomorrow
& then hit the front end shop on Monday {'hit' the front end shop? Woops,
may be I should say "drive in to the front end shop??? .... Thanks again guys, Bill......
ps, if I have to replace a spindle? Why not just replace TWO spindles & go to the LS1 spindles so I'll be ready for the C5 upgrade??? he,he,he, something good
could just happen from my 'curb experience', huh???
& then hit the front end shop on Monday {'hit' the front end shop? Woops,
may be I should say "drive in to the front end shop??? .... Thanks again guys, Bill......
ps, if I have to replace a spindle? Why not just replace TWO spindles & go to the LS1 spindles so I'll be ready for the C5 upgrade??? he,he,he, something good
could just happen from my 'curb experience', huh???
Thread
Thread Starter
Forum
Replies
Last Post
dbusch22
Forced Induction
6
10-31-2016 11:09 AM