unbbalanced engineering rag joint eliminator installed
#1
unbbalanced engineering rag joint eliminator installed
I finally got to put it on after getting it from a member on this board, I just took my grinder with a cut off disc on there and cut right into the rubber and through the rivets, then tapped them out with a punch and hammer, only took about 30 min to do
#11
Just a word of advise, when tapping out those rivets be sure that you don't collapse or expand the upper part of the steering joint If you do be sure to tap it back to normal length. Just did this on my car and the steering rack, all the play i had in the wheel is gone now!
#12