I'll post pics up tomorrow. Well, of everything but the cam. As it's still in the car right now. I'm moving up to something a little bigger now.

Comp 987 valvesprings - good up to .600 lift... Have no more than 1k miles on them. I pulled them off soon after install and put on a beefier set of CM618's on. I'm looking to get $75 for the springs, OBO.

Comp Cams "EX" HR Grind camshaft - 230/236 duration .598/.608 lift w/ 1.6 RR's. 110*LSA w/ an LC of 106*. I will include the cam card w/ cam when I send it. Asking for $200 OBO for the cam.

Qty 4 - Polished 10 star 2000+ Aluminum Camaro Wheels. The 10 spoke - I guess? 16 inch factory rims but more of a chrome/polished finish. $250 OBO takes these.

I also have 2 mini spare tires, both are not used/ or very little use and are for a 4th gen. $20 each... <- prefer not to ship as they're kinda bulky.

 

PM'd ya, I'll need everything for the cam swap...let me know.

 

I've only got the cam. The valvesprings will work, but you'll need to check each and every installed height. Comp R lifters would be a good addition as well.

 

Also have a pair of 16 inch ET streets.. They're like new. maybe 5 passes on them. Haven't even been heat cycled enough to get the loose rubber out from between the treads. $200 for the pair.

 

The 987's do not fit in the stock seat...they require machining...

 

ahh.. oops. They fit mine - but my heads have been worked over. Thanks for the heads up

 

$200 for rims now... and... TTT